Responsive image

Academic Research - Automobile Engineering


Research Facilities

Sl. No.FacilityDescription
1Data1Data2


Supervisors

Sl. No.Name of the SupervisorReference No.Name of the UniversityResearch AreaE-Mail ID Phone No.
1Dr.C.Jegadheesan3120032AU, ChennaiAutomotive electronics and control, Mechatronics systems, Alternate fuelscjegadheesan.auto@kongu.ac.in9003760212


Research Scholars

Sl. No.Name of the ScholarReg. No.Name of the UniversityName of the SupervisorResearch AreaStatus


Journals

Sl. No.Title of the paperName of the journalInternational / NationalVol. No. / Issue No./ Page No. / YearAuthors
1An investigation on wear loss and hardness of nitro-carburizing coated stainless-steel grade-316Materials Today: ProceedingsInternationalVol.66, No.3
pp.1398-1404, 2022
M.Jeyakymar
V.Munusami
P.Shanmugam
N.Boopalan
S.Boopathi
M.Sureshkumar
2Effect of solar shading device inside the cavity of double skin facade for increasing energy efficiency: An experimental studyAIP conference ProceedingsInternationalVol.2520, p.030006, 2022H.H.Krishnan
P.C.Murugan
J.P.Varughese
N.S.Mithra
A.K.Bakthavatsalam
M.M.Premalatha
G.Glivin
3Exploring the efficacy of nano fluid (Al2O3) based battery thermal management system using CFDAIP Conference ProceedingsInternationalVol.2446, p.130003, 2022S.Sivakumar
P.Somasundaram
4An investigation on influence of battery materials for efficient lithium-ion battery pack designAIP Conference ProceedingsInternationalVol.2446, p.080001, 2022S.Sivakumar
P.Somasundaram
5Ultrasonication time optimization for multi-walled carbon nanotube based Therminol-55 nanofluid: an experimental investigationJournal of Thermal Analysis and CalorimetryInternationalVol.147, pp.10329-10336
August 2022
P.Ganesh Kumar
P.Rajendran
D.Sakthivadivel
P.Somasundaram
V.S.Vigneswaran
Sung Chul Kim
6Investigation on the technical and economic benefits of implementing biomass gasifier in clay brick manufacturing industriesSustainable Energy Technologies and AssessmentsInternationalVol.53, Article ID: 102554
July 2022
P.C.Murugan
P.Saji Raveendran
S.Joseph Sekhar
P.Navaneethakrishnan
W.Beno Wincy Godwin Glivin
7Augmented v-corrugated absorber plate using shot-blasting for solar air heater-Energy, Exergy, Economic, and Environmental (4E) analysisProcess Safety and Environmental ProtectionInternationalVol.165, pp.514-531
July 2022
P.Ganesh Kumar
V.S.Vigneswaran
K.Balaji
S.Vinothkumar
P.Rajendran
D.Sakthivadivel
M.Meikandan
Sung Chul Kim
8Experimental performance of a mobile air conditioning unit with small thermal energy storage for idle stop/start vehiclesJournal of Thermal Analysis and CalorimetryInternationalVol.147, No.8
pp.5117-5132, 2022
R.Prabakaran
S. Sidney D.M.Lal
S.Harish
S.C.Kim
9A review on carbon nanomaterials for K-ion battery anode: Progress and perspectives International Journal of Energy ResearchInternationalVol.46
pp.4033-4070, 2022
A.K.Thakur
M.S.Ahmed
J.Park
R.Prabakaran
S.Sidney
R.Sathyamurthy
Sung Chul Kim
P.Somasundaram
Jaekook Kim
J.Y.Hwang
10A neem oil-based biodiesel with DEE enriched ethanol and Al2O3 nano additive: An experimental investigation on the diesel engine performanceCase Studies in Thermal EngineeringInternationalVol.34
p.102021, 2022
D.Sakthivadivel
P.GaneshKumar
R.Prabakaran
V.S.Vigneswaran
K.Nithynandhan
S.C.Kim
11A Study on the Design and Fabrication of Dry Cell Electrolysis Setup for Hydrogen GenerationLecture Notes in Mechanical EngineeringInternationalVol.12
pp.2291-2303, 2022
K.Nithyanandhan
S.Ranjithkumar
G.Dwivedi
S.Periasamy
12Numerical and experimental study on the effect of nozzle position and inlet air temperature in an industrial-type biomass gasifierBiomass Conversion & BiorefieneryInternationalVol.12
pp.2291-2303, 2022
P.C.Murugan
S.R.Padmavathy
S.Nithyanandan
G.Glivin
B.W.W.Roy
J.S.Santhappan
13Extremal-Micro Genetic Algorithm Model for Time-Cost Optimization with Optimal Labour Productivity.Strojniski Vestnik-Journal of Mechanical EngineeringInternationalVol.67, No.12
pp.682-692, 2022
A.Sivakumar
P.Sathiamurthi
K.S.Karthi Vinith
14An automotive radiator with multi-walled carbon-based nanofluids: A study on heat transfer optimization using MCDM techniquesCase Studies in Thermal EngineeringInternationalVol.29, p.101724, 2022Vinothkumar Sivalingam
Poongavanam Ganesh Kumar
R.Prabakaran
Jie Sun
Ramalingam Velraj
Sung Chul Kim
15Exploring the thermo-physical characteristic of novel multi-wall carbon nanotube-herminol-55-based nanofluids for solar-thermal applicationsEnvironmental Science and Pollution ResearchInternationalVol. 29, 10728
pp.107-17, 2022
Poongavanam GaneshKumar
Duraiswamy Sakthivadivel
R.Prabakaran
Shanmugarajan Vigneswaran
Manivannan SakthiPriya
Amrit Kumar Thakur
Ravishankar Sathyamurthy
Sung Chul Kim
16Feasibility of tea tree oil blended with diethyl ether and diesel as fuel for diesel engineCase Studies in Thermal EngineeringInternationalVol.31, p.101819, 2022Rajendran Prabakaran
G.Manikandan
P.Somasundaram
Poongavanam Ganesh Kumar
Mohammad Salman
C.Jegadheesan
Sung Chul Kim
17A novel solar powered milk cooling refrigeration unit with cold thermal energy storage for rural applicationEnvironmental Science and Pollution ResearchInternationalVol.29, pp.16346-16370, 2022Shaji Sidney
R.Prabakaran
Sung Chul Kim
Mohan Lal Dhasan
18An Investigation on Corrosion and Wear Behavior of Automotive MaterialsSAE Technical PaperInternationalVol.2021, p.0238
November 2021
S.Deepan Kumar
N.Boopalan
R.Praveenkumar
G.E.Manojkumar
J.Kithiyon Joshva
Sahaya Jufert Roy
19Design and Analysis of a Muffler for Engine Exhaust Noise and Heat ReductionSAE Technical PaperInternationalVol.28, p.0128
September 2021
S.D.Kumar
N.Praveenkumar
S.Arulkumar
N.Boopalan
S.Praveenkumar
20R1234yf/R134a Based Refrigerant Mixture for Automobile Air Conditioning Systems: A Thermodynamic ApproachIOP Journal of PhysicsInternationalVol.2054, p.012064
September 2021
R.Prabakaran
P.Somasundaram
S.Sidney
K.Sanjeev
F.Mohamed
V.M.Subathran
21Experimental investigation on performance, combustion and emission characteristics of CI engine with on-site hydrogen generationMaterials Today: ProceedingsInternationalVol.46, No.11
pp.5469-5474
October 2020
K.Nithyanandhan
S.Arun Kumar
M.Ragul Kumar
R.Sivakumar
22Energy conservation in vapour compression refrigeration system using vapour injection techniquePart E: Journal of Process Mechanical EngineeringInternationalVol.235, No.4
pp.779-784
August 2021
R.Chandramohan
P.Somasundaram
23Selection of the best refrigerant for air conditioning system using different MCDM methods: A replacing R134a in automobile comparative studyCase Studies in Thermal EngineeringInternationalVol.27, p.101344
August 2021
P.Ganeshkumar
S.Vinothkumar
R.Prabakaran
Mohammad Salman
Sung Chul Kim
24Conversion of biowaste to biogas: A review of current status on techno-economic challenges, policies, technologies and mitigation to environmental impactsFuelInternationalVol.302, p.121153
June 2021
Godwin Glivin
N.Kalaiselvan
V.Mariappan
M.Premalatha
P.C.Murugan
S.Joseph Sekhar
25Response Surface Methodology to predict the performance and emission characteristics of gas-diesel engine working on producer gases of non-uniform calorific valuesEnergyInternationalVol.234, p.121225
June 2021
G.Arun Prasad
P.C.Murugan
W.Beno Wincy
S.Joseph Sekhar
26Statistical analysis of electrodeposited nickel coating to S275JR grade mild steelMaterials Today: ProceedingsInternationalVol.46, No.9
pp.4159-4164
March 2021
S.Govindan
M.Boopathi
A.P.Venkatesh
T.Maridurai
T.Sathish
E.Balakrishnan
27Real-Time Performance Analysis of Temperature Process using Continuous Stirred Tank ReactorInternational Conference on Emerging Smart Computing and Informatics Internationalpp.647-650, 2021M.PonniBala
E.B.Priyanka
K.Prabhu
P.BharathiPriya
T.Bhuvana
V.Cibi Raja
28Genetic Algorithm Based Robust H? Loop Shaping Control of SI EnginesInternational Conference on Emerging Smart Computing and Informatics Internationalpp. 639-642, 2021G.Manikandan
P.Senthil Kumar
N.S.Sivakumar
S.Srinivasan
V.SeenivasaPerumal
N.Dhavaneeswaran
29Experimental Research on the Performance and Emission Characteristics of The CI Engine using Biodiesel From Canola Oil Turkish Journal of Physiotherapy and RehabilitationInternationalVol.32, No.2
pp.888-895, 2021
G.Manikandan
S.HariharaSuthan
M.JeevaBharathi
R.BarathKishore
S.Yokeswaran
M.Harishkumar
30Review on Online Monitoring and Control in Industrial Automation–An IoT PerspectiveIOP Conference Series: Materials Science and EngineeringInternationalVol.1055, No.1
p.012034, February 2021
C.Maheswari
AAB.Perinchery
E.B.Priyanka
K.S.Ambika
S.Narmatha
A.Prenitha
M.Monisha
31Design and Analysis of six DOF Robotic ManipulatorIOP Conference Series: Materials Science and EngineeringInternationalVol.1055, No.1
p.012005, February 2021
V.G.Pratheep
M.Chinnathambi
E.B.Priyanka
P.Ponmurugan
P.Thiagarajan
32Design and Fabrication of a Multinomial Model for Machine Interference ProblemIOP Conference Series: Materials Science and EngineeringInternationalVol.1055, No.1
p.012049, February 2021
D.V.Prabu
B.M.Priya
E.B.Priyanka
G.Kalaiarassan
33Proliferative Diabetic Retinopathy Diagnostic Investigation using Retinal Blood Vessels Mining TechniqueSensing and ImagingInternationalVol.22, No.10
February 2021
M.Ponnibala
E.B.Priyanka
S.Thangavel
34Study on performance and emission characteristics of split injection CRDi engine fueled with orange peel oil and diethyl etherIOP Conference Series: Materials Science and EngineeringInternationalVol.1055, No.1
p.012043,February 2021
S.Periasamy
J.Chinnasamy
J.Natarajan
S.Ravirajan
D.Nagharajan
35Study and Simulation of Autonomous Quadrotor Tracking a Pre-Defined Trajectory Using MatlabIOP Conference Series: Materials Science and EngineeringInternationalVol.1055, No.1
p.012045, February 2021
J.Chinnasamy
S.Periasamy
A.P.Singh
S.Mohanesh
R.Manikandan
L.Gokul
S.Deepak
36Design and Analysis of Bumper Beam and Energy Absorbers by using Composite MaterialsIOP Conference Series: Materials Science and EngineeringInternationalVol.1055, No.1
p.012044, February 2021
J.Chinnasamy
S.Periasamy
V.Chinnasamy
H.P.Kumar
S.Hariharan
A.Diwakar
B.Piruthiviraj
37Experimental Investigation for the usage of Diesel-Jatropha–Rice bran Biodiesel Mixture Blends in Four Stroke Diesel EngineIOP Conference Series: Materials Science and EngineeringInternationalVol.1055, No.1
p.012067, February 2021
K.K.Vinith
A.Soundar
S.Mahalingam
S.Sujai
P.G.Prasad
38Experimental study and analysis of single slope solar still integrated with Phase Change MaterialIOP Conference Series: Materials Science and EngineeringInternationalVol.1059, No.1
p.012010, February 2021
V.G.Pratheep
M.Chinnathambi
E.B.Priyanka
P.Ponmurugan
P.Thiagarajan
39Experimental Study and Performance Analysis of Phase Change Material Integrated Stepped Slope Solar StillIOP Conference Series: Materials Science and EngineeringInternationalVol.1059, No.1
p.012002, February 2021
N.Boopalan
B.Kalidasan
K.Ranjith
B.Dhanush
S.Anbarasu
S.P.Selvam
40Effect of shot blasting on droplet contact angle of carbon aided phase change nanocompositesSurface EngineeringInternationalVol.37, No.8
pp.1001-1011
January 2021
P.Ganesh Kumar
R.Prabakaran
D.Sakthivadivel
N.Thangapandian
R.Velraj
S.C.Kim
41Effects of gasoline fumigation on the performance and emission characteristics of CI engine fuelled with mahua biodieselIn AIP Conference ProceedingsInternationalVol.2317, No.1
p.030014, February 2021
S.Sathiskumar
M.Sureshkumar
R.V.R.Kumar
R.Aswathaman
N.Dhavaneeswaran
42IoT Based Monitoring and Control of Fluid Transportation using Machine LearningComputer and Electrical EngineeringInternationalVol.89, p.106899
January 2021
E.B.Priyanka
C.Maheswari
S.Thangavel
M.Ponnibala
T.Kalavathidevi
N.S.Sivakumar
43Advancement in graphene-based nano composites as high capacity anode materials for sodium-ion batteriesJournal of Material Chemistry AInternationalVol.9, pp.2628-2661
December 2020
A.Thakur
M.Ahmed
Oh, G, Kang
H, Jeong, Y
R.Prabakaran
M.P.Vikram
S.W.Sharshir
J.Kim
J.Hwang
44Optimization model for the analysis on the performance and emission characteristics of a CI Engine running on Ethanol-Butanol Diesel BlendsGlobal Research CommunicationsInternationalVol.40, pp.343-356, 2020S.Ajay
P.Somasundaram
V.C.HarisshRagavendra
E.Hariprasath
S.Gowrishankar
45Computational analysis of mixture (LPG/Air) Formation in a dual fuel diesel engineSolid State TechnologyInternationalVol.63, No.6
pp.9652-9658, 2020
C. J.Thomas Renald
P.Somasundaram
S.Yuvaraj
K.Karthikeyan
46Certain analysis of a solid rocket motor (SRM) with modified pentagonal grain configurationSolid State TechnologyInternationalVol.63, No.6
pp.9637-9651, 2020
C.J.Thomas Renald
P.Somasundaram
S.Yuvaraj
M.Velliangiri
ArturasJukna
47Computer vision based real time tracking system to identify overtaking vehicles for safety precaution using single board computerJournal of Advanced Research in Dynamical & Control SystemsInternationalVol.12, No.7
pp.1551–1561
June 2020
S.Sathesh
V.A.Pradheep
S.Maheswaran
P.Premkumar
P.Sriram
48Experimental Investigation on Performance and Emission Characteristics of Biodiesel Fuelled Compression Ignition Engine with Oxygen EnrichmentInternational Journal of Advanced Science and TechnologyInternationalVol.29, No.5
pp.4054-4063
May 2020
N.Boopalan
S.Sathiskumar
R.Jeevabharathi
D.Gokulraj
49Design and Development of Chemical Free Green Embedded Weeder for Row Based CropsJournal of Green EngineeringInternationalVol.10, No.5
pp.2103-2120
May 2020
S.Maheswaran
S.Sathesh
M.Gayathri
E.D.Bhaarathei
D.Kavin
50Effect of Methanol Fumigation on Performance and Emissions Characteristics in a Jatropha Bio-Diesel Fueled Single Cylinder Constant Speed CI EngineInternational Journal of Scientific & Technology ResearchInternationalVol.9, No.4
pp.332-337
April 2020
S.Ranjithkumar
C.Suthan
B.Earnestpremkumar
R.Revand
M.Rajesh
51Design and Fabrication of Automotive Vehicle Dynamic Control with Collision Avoiding and Warning SystemInternational Journal of Scientific & Technology ResearchInternationalVol.9, No.4
pp.3676-3680
April 2020
N.Boopalan
K.Ranjith
S.Praveenraj
B.Piruthiviraj
52Design and Fabrication of Adaptive Spoiler for Go-Kart VehiclesInternational Journal of Scientific & Technology ResearchInternationalVol.9, No.3
pp.2044-2049
March 2020
K.S.Karthi Vinith
P.Sathiamurthi
53Development of Machine Learning Based Grain Classification and Sorting with Machine Vision Approach for Eco-Friendly EnvironmentJournal of Green EngineeringInternationalVol.10, No.3
pp.526-543
March 2020
S.Maheswaran
B.Vivek
P.Sivaranjani
S.Sathesh
K.Pon Vignesh
54Automated Pneumatic Bumper For Vehicle SafetyInternational Journal of Scientific & Technology ResearchInternationalVol.9, No.2
pp.224-229
February 2020
S.Sathiskumar
R.Dhanush Guru
N.Dhavaneeswaran
55Headlight Glare Reduction Using Parallel Beam TechniqueInternational Journal of Scientific & Technology ResearchInternationalVol.9, No.2
pp.644-647
February 2020
P.Somasundaram
C.Jegadheesan
S.Vinoth
S.T.Arun Kumar
N.Kowsalya
56Driver Fatigue Reduction using Touch Enabled Steering WheelInternational Journal of Scientific & Technology ResearchInternationalVol.9, No.2
pp.648-651
February 2020
P.Somasundaram
C.Jegadheesan
M.Srinithin
R.Saravanan
C.Madhu Krishnan
57A Review of Hydrogen Generation by Dry Cell Electrolysis Method to Improve Fuel Economy and Emission Reduction in SI Engine by Cleaner CombustionInternational Journal of Scientific & Technology ResearchInternationalVol.9, No.2
pp.555-561
February 2020
K.Nithyanandhan
S.Arun kumar
M.Ragulkumar Sivakumar
58Automatic Vehicle Speed Control System in A Restricted ZoneInternational Journal of Scientific & Technology ResearchInternationalVol.9, No.2
pp.2207-2210
February 2020
S.Sathiskumar
G.V.Navean
R.Hari Prakash
S.Vishnu Praveen
59Experimental Evaluation of A CI Engine Running on Blends of Diesel and Methanol Fuel with Copper Oxide Nano ParticlesInternational Journal of Scientific & Technology ResearchInternationalVol.9, No.1
pp.247-251
January 2020
G.Manikandan
K. Karthikeyan
S.Gokul
60Online Oil Condition Monitoring of Four-Stroke EngineInternational Journal of Innovative Technology and Exploring EngineeringInternationalVol.9, No.2
pp.230-243
December 2019
G.Manikandan
S.Ranjithkumar
M.Mohan
B.Bharath Kumar
S.Srinivasan
61Productivity Improvement through Flexibility Creation in Disk Pad ModuleInternational Journal of Scientific & Technology ResearchInternationalVol.8, No.12
pp.1472-1477
December 2019
K.Nithyanandhan
S.Ranjithkumar
N.Dhavaneeswaran
62Performance and Emission Testing of Methyl Ester of Aloe vera using Metal Oxide as Additive in CI EngineInternational Journal of Innovative Technology and Exploring EngineeringInternationalVol.9, No.1
pp.126-133
November 2019
S.Sathiskumar
N.Dhavaneeswaran
R.Dhanush Guru
63Performance Of P1 Model In The Prediction Of Static Temperature And Velocity Magnitude Of Therminol D-12 In An Evacuated Tube Solar CollectorInternational Journal of Innovative Technology and Exploring EngineeringInternationalVol.8, No.11
pp.255-261
September 2019
P.Selvakumar
P.Somasundaram
A.Tamilvanan
R.Karthikeyan
T.Rajagopal
64Performance and Emission Test in CI Engine using Magnetic Fuel Conditioning with Nano AdditivesInternational Journal of Recent Technology and EngineeringInternationalVol.8, No.3
pp.7823-7826
September 2019
P.Sathiamurthi
K.S.Karthi Vinith
A.Sivakumar
65Microstructural evaluation and study of shock wave as an energetic source for synthesis of nanomaterialsPolimer Bulletin - SpringerInternationalhttps://doi.org/10.1007/
s00289-018-2625-2
November 2018
P. Somasundaram
Joseph Thomas Renald
66Performance, emission, energy and exergy analyses of gasoline fumigated DI diesel engineJournal of Thermal Analysis and CalorimetryInternationalhttps://doi.org/10.1007/
s10973-018-7933-0
November 2018
M.Bharathiraja
R.Venkatachalam
V.Senthilmurugan
67Heat Exchanger Design Modification for Performance Optimization Using CFD ToolsJournal of Applied Engineering ResearchInternationalVol.13, No.18
pp.13727-13733
October 2018
S.Srinivasan
V.Seenivasaperumal
G.Manikandan
68Parametric Optimization of Input Variables in a Di-Diesel Engine Using Diesel Ethanol Blends With Diethyl Ether AdditiveTaga Journal of Graphic TechnologyInternationalVol.14, No.1
pp.3015-3028
April 2018
P.Somasundaram
N.Vadivel
69A Novel Fly ash Nanofluid for Automobile Engine Cooling Applications- Preparation and Comparative Studies on PropertiesTaga Journal of Graphic TechnologyInternationalVol.14, No.1
pp.3515-3522
April 2018
M.Bharathiraja
P.Boopathi
R.Venkatachalam
N.Nedunchezhian
R.Subramanian
P.Manikalithas
70Experimental Investigation of Novel Methanol Fumigation on Single Cylinder Constant Speed Diesel EngineInternational Journal of Intellectual Advancements and Research in Engineering ComputationsInternationalVol. 6, No.1
pp.771-777
March 2018
M.Bharathiraja
S.Mohanesh
R.Manikandan
C.Suthan
R.Revand
71Investigation effect of hydrogen addition on the performance and exhaust emissions of Pongamia pinnata biodiesel fueled compression ignition engineInternational Journal of Green EnergyInternationalVol.14, No.15
pp.1256-1268
2017
C.Jegadheesan
P.Somasundaram
B.Meenakshipriya
U. P.Vignesh
72Investigation of Fluid Flow, Turbulence and Combustion for various Piston Configurations in a Compression Ignition Engine using CFD ModellingAsian Journal of Research in Social Sciences and HumanitiesInternationalVol.7, No.3
pp.650-670
March 2017
P.Manikalithas
R.Venkatachalam
M.KalilRahiman
M.Bharathiraja
73Experimental And Mathematical Investigation on Performance And Emission Characteristics of Oxygen Enriched Air In Intake of A Single Cylinder Diesel EngineJournal of Advances in ChemistryInternationalVol.12, No.27
pp.5814-5824
January 2017
V.SenthilMurugan
R.Venkatachalam
M.Bharathiraja
N.Prasanna
74Experimental and Mathematical Investigation on Performance and Emission Characteristics of Ethanol and Methanol Fumigation in a Single Cylinder Diesel EngineAsian Journal of Research in Social Sciences and HumanitiesInternationalVol.7, No.1
pp.632-652
January 2017
M.Bharathiraja
R.Venkatachalam
N.Prasanna
75Experimental Analysis on Solar Water Heater with Corrugated Absorber for Enhanced Heat TransferJournal of Thermal Energy SystemsInternationalVol.1, No.2
pp.8-19
2016
P.Selvakumar
P.Somasundaram
76Experimental analysis of exhaust gas after treatment system using water scrubbing in a single cylinder diesel engine for diesel and biofuel blends Transportation Research Part D: Transport and EnvironmentInternationalVol.49
pp.291-300
December 2016
M.Bharathiraja
R.Venkatachalam
N.Tiruvenkadam
77Biodiesel from Plant Seed Oils as an Alternate Fuel for Compression Ignition Engines - A ReviewEnvironmental Science and Pollution ResearchInternationalDOI: 10.1007/
s11356-016-7754-2
pp.1-20
October 2016
C.Vijayakumar
M.Ramesh
A.Murugesan
N.Paneerselvam
D.Subramaniam
M.Bharathiraja
78Experimental investigations of Jominy End Quench test using CuONano fluidsJournal of Advances in ChemistryInternationalVol.12, No.10
pp.4455-4464
October 2016
M.Baskaran
KCK.Vijayakumar
M.Bharathiraja
79Development of optimum friction new nano hybrid composite liner for biodiesel fuel engineTransportation Research Part D: Transport and EnvironmentInternationalVol.47, pp.22-43
August 2016
N.Tiruvenkadam
P.R.Thyla
M.Senthilkumar
M.Bharathiraja