| Sl. No. | Facility | Description |
|---|---|---|
| 1 | 2620-Arctic 3G Gateway | GPRS Gateway device used for remote monitoring |
| 2 | 2500-Viola - M2M Gateway | Machine to Machine Gateway used for network security with inbuilt firewall |
| 3 | GSM Modem Maestro Heritage (Including Antenna & RS 232 Cable) | GSM modem is used for sending alarm message to mobile phones |
| 4 | Movicon SCADA (Unlimited I/O) | Supervisory Control and Data Acquisition software |
| 5 | LabVIEW Robotics sbRIO Starter Kit | Fully assembled robot base starter kit NI sRIO-9632 embedded controller 180-day evaluation of LabVIEW Robotics, LabVIEW Real-Time, and LabVIEW FPGA module software Ultrasonic sensor, encoders, motors, battery, and charger included |
| 6 | Smart Camera Evaluation Kit | Monochrome 640 x 480 CCD image sensor 533 MHz PowerPC Built-in lighting controller Quadrature encoder support, optoisolated digital I/O, and dual Gigabit Ethernet Program with LabVIEW Real-Time Module or configure with Vision Builder AI |
| 7 | NI USB-6221 (Qty : 2) | 16 analog inputs (16-bit, 250 kS/s) 2 analog outputs (16-bit, 833 kS/s); 24 digital I/O (8 clocked); 32-bit counters High-level graphical programming environment |
| 8 | LabVIEW for Robotics Module | I/O connectivity for desktop, real-time systems, and FPGAs Inherent parallelism for easily visualizing concurrent tasks Connectivity to sensors and actuators from top vendors including SICK, Garmin, and Maxon Tools for importing code from other languages including C/C++ and VHDL Physics-based environment simulator for verifying your algorithms in software |
| 9 | LABVIEW 2011 NI Academic Site License | LABVIEW 2011 Professional Software for Different engineering application development platform |
| 10 | Linear Motion Module 1-Stage pendulum module, | 1-Stage Inverted pendulum module. GT-400-SV motion controller, Linear 1-stage IP electric control module. Linear 1 stage IP DOS experiment software (Include Source Code) Googol Simulink software experiment platform with MATLAB Simulink |
| 11 | Ball and Beam Digital Control System | Ball and Beam to study different control characteristics. Ball and Beam Mechanical Body Equipped with DC Servo Motor and Drive Electric Control Box with motion controller and DC Power supply inside. Intelligent motion control platform user guide and experimental manual. |
| 12 | Intellisuite software | Micro Product Design Software |
| 13 | NI - SCXI 1000 Signal Conditioner Module | Signal conditioner - DAQ Module for Measurement of Strain, Displacement Measurement using LVDT and Temperature measurement. |
| 14 | Piezo electic Pick up sensor | To Measure Vibration |
| 15 | Colour Sensor | Colour Sensor used to sense different colour for automation application. |
| 16 | Radiation Pyrometer | Non contact type Temperature Measurement Gun Max Temp up to 500 degree celsius |
| 17 | Automation Studio 5.6 (6 user license) | It is simulation software used to design and analysis of hydraulic, pneumatic, Proportional hydraulic, Proportional Pneumatic and electrical circuits for required application. |
| 18 | Allen-Bradley Programmable Automation controllers with Rockwell software Bundles (PLC Micrologix series, Compact Logix L23 Controller, Temperature Monitoring & Control System, Variable Frequency Drive, Pressure flow Control System, Human Machine Interface) | The PLCs with digital and analog module used for accurate control over field I/Os. The programming software for these PLCs enabled with Intelligent module which provides accurate control over analog I/Os. |
| 19 | Matlab Software 2023B | Tool for student programming |
| 20 | Electro Hydraulic Servo System & Accessories | To test speed and sliding mode of piston |
| 21 | Mechanical Seal test Rig - Tribological Study | To assess the friction and wear of mechanical seal |
| 22 | Inverted pendulum, Ball & Beam control system | To study flight motion control system |
| 23 | Sound Pressure sensor | To measure sound level |
| 24 | Tribometer Pin on Disc friction and wear test rig | To measure friction and wear rate |
| 25 | Data LOG EMG system (MWX8); Twin axial Goniometer (SG75, SG110); EMG electrode (SX2230) | To measure the muscle fatigueness |
| 26 | Thermal spray machine & accessories | To apply coatings to wide range of materials |
| 27 | Copper Strip Corrosion Test Apparatus | To measure the corrosion sample |
| 28 | High Temperature Furnace | To sinter the ceramic materials |
| 29 | NAO V6 ROBOT | To study degrees of freedom and motion kinematics |
| 30 | DOBOT magician functional kit | For Pick and place, 3D Printing, Laser engraving |
| 31 | Polludrone Air Quality Monitoring | To measure air quality index |
| 32 | Minispir PC based Spirometer | To measure the volume of air intake |
| 33 | CNC wire cut EDM machine | To make grooves on hard metals |
| 34 | EMOTIV EPOCX 14 CHANNEL Mobile brain wear | To measure brain signals |
| 35 | 3D printer | To fabricate 3D model |
| Sl. No. | Name of the Supervisor | Reference No. | Name of the University | Research Area | E-Mail ID | Phone No. |
|---|---|---|---|---|---|---|
| 1 | Dr.K.Krishnamurthy | 2120177 | AU, Chennai | Manufacturing Engineering | krishmech@kongu.ac.in | 9842722881 |
| 2 | Dr.B.Meenakshipriya | 2320237 | AU, Chennai | Mechatronics, Non Linear Control, Robotics, Machine Learning | bmp@kongu.ac.in | 9842799990 |
| 3 | Dr.C.Maheswari | 2520046 | AU, Chennai | IoT based industrial automation, Data nalysis, Intelligent control | maheswari@kongu.ac.in | 9865210838 |
| 4 | Dr.N.Nithyavathy | 2940003 | AU, Chennai | Nanotechnology, Mechatronics, Automation | nithyavathy@kongu.ac.in | 9486939041 |
| 5 | Dr.S.K.Thangarasu | 4020079 | AU, Chennai | Mechatronics, Condition Monitoring, Sensors, Neural Networks | thangarasu@kongu.ac.in | 9942783338 |
| 6 | Dr.S.Praveenkumar | 3920007 | AU, Chennai | Materials, machine design, optimization, industry 4.0 | praveenkumar@kongu.ac.in | 9500575414 |
| 7 | Dr.N.Muralidharan | 4020078 | AU, Chennai | Materials, Manufacturing, Composites, Machining | muralimts@kongu.ac.in | 9994065073 |
| 8 | Dr.K.Suganeswaran | 4120020 | AU, Chennai | Friction Stir Process, Materials and Processing, Surface Coatings, Tribology | sugan@kongu.ac.in | 9788115198 |
| 9 | Dr.T.Tamilarasi | 4120012 | AU, Chennai | Thin Film Coating, Mechatronics, Robotics | tamilravi@kongu.ac.in | 9842723255 |
| 10 | Dr.V.K.Gobinath | 3820014 | AU, Chennai | Renewable Energy, Solar Energy Materials, Materials, Manufacturing | gobinathmts@kongu.a.cin | 9750260564 |
| 11 | Dr.E.B.Priyanka | 4020058 | AU, Chennai | IoT, Industrial Automation, Machine Learning, Data Mining | priyanka.auto@kongu.ac.in | 8098927503 |
| 12 | Dr.R.Nithyaprakash | 4120072 | AU, Chennai | Tribology, Biomaterials, Manufacturing, Design | nithyaprakash.mts@kongu.ac.in | 9944586397 |
| Sl. No. | Name of the Scholar | Reg. No. | Name of the University | Name of the Supervisor | Research Area | Status |
|---|---|---|---|---|---|---|
| 1 | Dr.R.Kirubashankar | 10930421023 | AUT, CBE | Dr.K.Krishnamurthy | A study on the development and implementation of web-based remote monitoring, reporting and fault diagnosis system | Completed on 15.11.2013 |
| 2 | Dr.C.Maheswari | 10931222003 | AUT, CBE | Dr.K.Krishnamurthy | Design and implementation of fractional order based CDM- PID controller in SO2 emission control process | Completed on 29.10.2014 |
| 3 | Dr.S.Sathiyavathi | 10931222004 | AUT, CBE | Dr.K.Krishnamurthy | Design and implementation of interative learning control strategy for a class of systems | Completed on 03.11.2014 |
| 4 | Dr.P.Ponnambalam | 10930421033 | AUT, CBE | Dr.K.Krishnamurthy | Investigations on multicell converters with different controllers | Completed on 21.05.2015 |
| 5 | Dr.P.Ravichandran | 10931221002 | AUT, CBE | Dr.K.Krishnamurthy | Studies on Swarm Optimization techniques for parallel line Job-Shop Scheduling | Completed on 21.07.2017 |
| 6 | Dr.K.V.Maheshkumar | 10931221001 | AUT, CBE | Dr.K.Krishnamurthy | An investigation on the morphological and mechanical properties of graphene oxide reinforced compatibilized polyolefin nanocomposites | Completed on 22.02.2018 |
| 7 | Dr.T.Mohanraj | 1314269238 | AU, Chennai | Dr.S.Shankar | Tool condition monitoring in milling process using sensor fusion technique | Completed on 02.03.2018 |
| 8 | Dr.K.Deepandurai | 71030321019 | AUT, CBE | Dr.R.Parameshwaran | Wear and friction stir welding studies on ynthesized AA7075/SiCp composites | Completed on 24.09.2018 |
| 9 | Dr.M.Bhuvanesh Kumar | 1313269221 | AU, Chennai | Dr.R.Parameshwaran | Development of an integrated performance improvement model for indian manufacturing enterprises using lean principles | Completed on 26.10.2018 |
| 10 | Dr.R.NaveenKumar | 1314269137 | AU, Chennai | Dr.S.Shankar | Management of musculoskeletal pain among hand screen printing worker-pre and post design analysis | Completed on 29.10.2018 |
| 11 | Dr.C.Baskar | 71030321011 | AUT, CBE | Dr.R.Parameshwaran | Design and development of integrated framework for mechatronics based new product development | Completed on 02.11.2018 |
| 12 | Dr.R.Gukendran | 71030321029 | AUT, CBE | Dr.R.Parameshwaran | Property assessment of heat treated ferrous and non-ferrous materials using ultrasonic and eddy current testing methods | Completed on 16.11.2018 |
| 13 | Dr.S.Ramakrishnan | 1314269226 | AU, Chennai | Dr.K.Krishnamurthy | Certain experimental investigations on the effect of nanoclay and jute fiber on the technical propertes of epoxy matrix | Completed on 20.05.2019 |
| 14 | Dr.A.Mohankumar | 1314269169 | AU, Chennai | Dr.R.Parameshwaran | An experimental investigation on the influence of fiber reinforcement on the mechanical and drilling behaviour of thermoset matrices | Completed on 08.07.2019 |
| 15 | Dr.G.Kalaiarassan | 11131231006 | AUT, CBE | Dr.K.Krishnamurthy | Positional error estimation for hydraulic actuated mobile robot controlled by digital flow control units | Completed on 25.11.2019 |
| 16 | Dr.A.Shanmugam | 1214269749 | AU, Chennai | Dr.K.Krishnamurthy | Parametric Analysis and optimization of glass fibre reinforced plastic composite and aluminium 7075 alloy by abrasive water jet machining | Completed on 16.03.2020 |
| 17 | Dr. S.K. Thangarasu | 1214269738 | AU, Chennai | Dr.S.Shankar | Prediction of single point cutting tool wear with cutting force signals using artificial neural networks | Completed on 09.06.2020 |
| 18 | Dr.E.B.Priyanka | 17242691119 | AU, Chennai | Dr.C.Maheswari | Investigations on the prediction of fault occurrences in an oil pipeline transportation system using integrated IoT module with data clustering algorithm | Completed on 29.07.2020 |
| 19 | Dr.A.Vimala Starbino | 1524369766 | AU, Chennai | Dr.S.Sathiyavathi | Design and implementation of sliding mode controller for non linear systems | Completed on 30.07.2020 |
| 20 | Dr.M.HarikrishnaKumar | 1314269157 | AU, Chennai | Dr.S.Shankar | Investigation on the morphological and mehcnical properties of dual particle reinforced compatibilized elastomeric nanocomposites | Completed on 14.08.2020 |
| 21 | Dr.K.Suganeswaran | 1314269162 | AU, Chennai | Dr.R.Parameshwaran | Investigations on surface integrity of AA7075 with Al2O3 and SiC reinforcements processed through FSP | Completed on 02.09.2020 |
| 22 | Dr.S.M.Senthil | 1314269128 | AU, Chennai | Dr.R.Parameshwaran | An experimental investigation on friction stir welding of aluminium alloy 6063-T6 pipes | Completed on 10.09.2020 |
| 23 | Dr.S.Praveenkumar | 1214269774 | AU, Chennai | Dr.R.Parameshwaran | Fabrication and testing of silver based composites for electrical contactors | Completed on 28.10.2020 |
| 24 | Dr.V.Arunkumar | 1314269154 | AU, Chennai | Dr.K.Krishnamurthy | Analysis on improving Nox removal efficiency from diesel engine exhaust using functional order based LQR-PI controller | Completed on 29.10.2020 |
| 25 | Dr.N.Senthilkannan | 71110331069 | AUT, CBE | Dr.R.Parameshwaran | Integrated approach for product and process optimization in manufacturing industries | Completed on 17.11.2020 |
| 26 | Dr.R.Prakash | 1414269809 | AU, Chennai | Dr.B.Meenakshipriya | Investigation on solar photovoltic-thermal water heating system with inorganic salt mixture based phase change materials | Completed on 21.04.2021 |
| 27 | Dr.R.Thiyagarajan | 1614469224 | AU, Chennai | Dr.B.Meenakshipriya | Investigations on enhanced adaptive acknowledgement based robust cryptographic algorithm for securing mobile ad-hoc networks | Completed on 22.04.2021 |
| 28 | Dr.A.Tony Thomas | 11230331120 | AUT, CBE | Dr.R.Parameshwaran | An investigation on the implementation of different controllers for an electrohydraulic servo system | Completed on 11.08.2021 |
| 29 | Dr.R.Nithyaprakash | 18142697131 | AU, Chennai | Dr.S.Shankar | Experimental and computationsal wear studies of silicon nitiride against ceramic and metallic biomaterials for human hip prosthesis | Completed on 07.01.2022 |
| 30 | Dr.M.Manikandan | 1614269115 | AU, Chennai | Dr.S.Shankar | Investigations on biodegradability, toxicity and tribological properties of kapok oils as a lubricant | Completed on 04.04.2022 |
| 31 | Dr.A.Muthukumar | 11240331051 | AUT, CBE | Dr.K.Krishnamurthy | Bus body manufacturing system via FMEA and fuzzy logic controller | Completed on 21.12.2022 |
| 32 | Dr.C.Naveen | 1513269201 | AU, Chennai | Dr.B.Meenakshipriya | Experimental investigations on electro hydraulic servo system using iterative learning controller | Completed on 10.08.2023 |
| 33 | Dr.K.Poomani | 17242697239 | AU, Chennai | Dr.S.Sathiyavathi | Design of intelligent controller to regulate propofol to control hypnosis during surgery | Completed on 09.11.2023 |
| 34 | Dr.S.Thangavel | 18132697128 | AU, Chennai | Dr.C.Maheswari | A study in TIG weld quality monitoring based on weld TIP degradation rate using machine learning algorithms | Completed on 14.10.2024 |
| 35 | Mr.S.Veerakumar | 19142691132 | AU, Chennai | Dr.K.Krishnamurthy | Parameter optimization of GMA welding process on duplex 2205 stainless steel using IRB1410 Arc welding robot | Pursuing |
| 36 | Mr.P.Magudapathi | 24142697105 | AU, Chennai | Dr.K.Krishnamurthy | Investigation on mechanical, structural, tribological and ballistic performance of graphine-ceramic-polymer reinforced hybrid natural fibre composites | Pursuing |
| 37 | Mr.G.Abbas | 22132697131 | AU, Chennai | Dr.S.Shankar | Investigation of cotton dust exposure and indoor air quality on the pulmonary health among the textile workers of Tamilnadu | Pursuing |
| 38 | Mr.D.Dinesh Kumar | 1414269816 | AU, Chennai | Dr.B.Meenakshipriya | Design and implementation of intelligent controllers for interacting spherical two tank non linear system | Pursuing |
| 39 | Mr.V.Sundhararaj | 1513469370 | AU, Chennai | Dr.B.Meenakshipriya | Enhancement of hybrid image watermarking algorithm using human visual system model based on discrete wavelet transform | Pursuing |
| 40 | Mr.S.R.Arun | 18142691211 | AU, Chennai | Dr.B.Meenakshipriya | Nonlinear discrete-time design methods for missile flight control systems | Pursuing |
| 41 | Mr.D.Venkatesa Prabu | 18142691157 | AU, Chennai | Dr.B.Meenakshipriya | Design and implementation of soft gripper for material handling | Pursuing |
| 42 | Mr.K.Senthilkumar | 23143697144 | AU, Chennai | Dr.B.Meenakshipriya | Modelling analysis and design of an multi-device interleaved bidirectional converters for electric vehicles | Pursuing |
| 43 | Mr.M.Denesh Babu | 17144691499 | AU, Chennai | Dr.C.Maheswari | Design and development of self organised bio-inspired multi-robot system | Pursuing |
| 44 | Ms.G.Divya | 21244697361 | AU, Chennai | Dr.C.Maheswari | A machine learning approach for smart city water management system using IoT | Pursuing |
| 45 | Ms.G.Kavipriya | 21224697372 | AU, Chennai | Dr.C.Maheswari | Structural health monitoring and prediction leakage occurrence in oil pipeline trasportation system using deep learning techniques | Pursuing |
| 46 | Ms.S.Vaisali | 22245691142 | AU, Chennai | Dr.C.Maheswari | Ergonomics assessment based on exoskeleton assistive robot for elderly people | Pursuing |
| 47 | Ms.S.Abirami | 21243691240 | AU, Chennai | Dr.C.Maheswari | Battery management system | Pursuing |
| 48 | Ms.R.Manjupriya | 23244691126 | AU, Chennai | Dr.C.Maheswari | Power quality improvement in solar PV-wind assisted DC microgrid using intelligent techniques | Pursuing |
| 49 | Mr.S.Anbalagan | 17133697281 | AU, Chennai | Dr.N.Nithyavathy | Development of metal oxide semiconducting nano materials for gas sensor application | Pursuing |
| 50 | Mr.A.Kumar | 17134697448 | AU, Chennai | Dr.N.Nithyavathy | Adroit data compressed structural design and samrt contrive radio system | Pursuing |
| 51 | Ms.P.Georgia Chris Selwyna | 19244691170 | AU, Chennai | Dr.N.Nithyavathy | Investigations on gold nanoparticles based selective detection of targeted breast cancer cells | Pursuing |
| 52 | Mr.C.Anbu | 21142697118 | AU, Chennai | Dr.N.Nithyavathy | Enhancement of SS-316 surface finishing properties through magnetic abrasive finishing | Pursuing |
| 53 | Mr.S.Arun Prakash | 23132697299 | AU, Chennai | Dr.S.Praveenkumar | Evaluation of microstructural and mechanical properties of 3D printed SS 316L parts before and after post processing | Pursuing |
| 54 | Mr.L.Sivaraj | 18142691280 | AU, Chennai | Dr.N.Muralidharan | Development characterization and machinability study on al based in situ composites for aerospace application | Pursuing |
| 55 | Mr.K.Sriram | 20152691104 | AU, Chennai | Dr.K.Suganeswaran | Alternative fuels for improving efficiency of internal combustion engine | Pursuing |
| 56 | Mr.K.Nithyanandhan | 21132691293 | AU, Chennai | Dr.K.Suganeswaran | Experimental investigation of single cylinder CI engine by RCCI technology | Pursuing |
| 57 | Mr.G.Raja | 22142697109 | AU, Chennai | Dr.V.K.Gobinath | Development of long term sustainable 3D printed antireflection glass cover sheet to attain efficient silicon solar cell performance | Pursuing |
| 58 | Mr.V.Muthukumar | 22142697108 | AU, Chennai | Dr.V.K.Gobinath | An experimental investigation and numerical modeling for augumenting bird striking performance of jet engine blades by surface engineering techniques | Pursuing |
| 59 | Mr.A.Manojkumar | 23142691126 | AU, Chennai | Dr.V.K.Gobinath | Fabrication and characterization of polyurethane containing metallic oxides for wound healing applications | Pursuing |
| 60 | Mr.K.Gopalakrishnan | 24142691198 | AU, Chennai | Dr.V.K.Gobinath | An effective approach on attaining enhanced silicon solar cell performance through sputter deposited perovskite thin films | Pursuing |
| 61 | Mr.S.Sathishkumar | 19142697113 | AU, Chennai | Dr.E.B.Priyanka | Influence of injection timing and split injection strategies on combustion performance and emission characteristics of a diesel engine fueled with bidiesel blended fuels | Pursuing |
| Sl. No. | Title of the paper | Name of the journal | International / National | Vol. No. / Issue No./ Page No. / Year | Authors |
|---|---|---|---|---|---|
| 1 | Investigation of Noise Induced Hearing Loss Among Power Loom Industry Workers in Tamil Nadu, India | Indian Journal of Otolaryngology and Head & Neck Surgery | International | Vol.76(6), pp.5531-5541 February 2025 | S.Shankar G.Abbas R.Naveenkumar R.Nithyaprakash C.Maheswari C.Prakash A.K.Basak |
| 2 | Sustainable manufacturing of 3D-Printed cyclic olefin copolymer coversheets with gahnite for enhanced silicon photovoltaic efficiency | Ceramics International | International | Vol.51(2), pp.2002-2013 January 2025 | G.Raja V.K.Gobinath Mohamad Reda A Refaai Uma Gandhi |
| 3 | Data Compression using Optimized Compressive Sensing in Cognitive radio network | International Journal of Communication Systems | International | Vol.38(2), p.1-14, 2024 | A.Kumar N.Nithyavathy |
| 4 | Enhanced photovoltaic efficiency through 3D-Printed COC/Al?O? anti-reflective coversheets | Journal of Materials Research and Technology | International | Vol.33, pp.3093-3105 December 2024 | Naif Almakayeel V.K.Gobinath G.Raja R.Rajasekar |
| 5 | Enhancing power conversion efficiency of polycrystalline silicon photovoltaic cells using yttrium oxide anti-reflective coating via electro-spraying method | Ceramics International | International | Vol.50(21), pp.42392-42403 November 2024 | Naif Almakayeel V.K.Gobinath G.Raja |
| 6 | Smartphone-Controlled Solar-Powered Weed Remover: An Innovative Solution for Sustainable and Pollution-Free Agriculture | Indian Journal of Environmental Protection | International | Vol.44(8), pp.727-733 November 2024 | V.K.Gobinath C.Vinodhini N.Kishore M.Kamaleeswaran K.V.Giriharan |
| 7 | Multi-response optimization on abrasive water jet machining of Aluminum 7075 alloy using Taguchi-DEAR methodology | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | International | Vol.238(6), November 2024 | A.Shanmugam T.Mohanraj K.Krishnamurthy A.K.Gur U.Caligulu |
| 8 | Development and Evaluation of Semi-Automated Pollution-Free Mulberry Plant Cutting Machine | Indian Journal of Environmental Protection | International | Vol.44, pp.817-824 November 2024 | K.Suganeswaran C.Vinodhini A.Ramaprabha P.Boopathi Raja T.Dhinakar |
| 9 | Analysis of air quality parameters on climate change phenomenon using Markov autoregressive model | Cogent Engineering | International | Vol.11(1), p.2421284 November 2024 | S.VijayaShanthy E.B.Priyanka V.Sampathkumar S.Manoj S.Vivek S.Karuppannan K.Kathiresan |
| 10 | Assessment of pulmonary function and respiratory symptoms among INDIAN textile sizing mill workers | Work | International | Vol.79(2), pp.765-774 November 2024 | S.Shankar G.Abbas R.Naveenkumar R.Nithyaprakash C.Maheswari C.Prakash A.K.Basak |
| 11 | Study of Respiratory Symptoms and Pulmonary Function among Neem Oil Industry Workers | Indian Journal of Occupational and Environmental Medicine | International | Vol.28(2), p.163-169 November 2024 | S.Shankar G.Abbas R.Naveenkumar R.Nithyaprakash C.Maheswari R.M.S.Mohanty A.K.Basak |
| 12 | Solar powered integrated multi sensors to monitor inland lake water quality using statistical data fusion technique with Kalman filter | Scientific Reports | International | Vol.14(1), p.25202 October 2024 | E.B.Priyanka S.Thangavel R.Mohanasundaram R.Anand |
| 13 | Mechanical and statistical pathway for the experimental investigation of the dairy industry effluent using non-thermal plasma | Desalination and Water Treatment | International | Vol.320, p.100749 October 2024 | C.Maheswari S.Ramya R.Baskar |
| 14 | Progress and recent advances in self-powered gas sensing based on triboelectric and piezoelectric nanogenerators | Chemical Engineering Journal | International | Vol.497, p.154740 October 2024 | S.Anbalagan K.Manojkumar M.Muthuramalingam S.Hajra S.Panda R.Sahu H.J.Kim A.Sundaramoorthy N.Nithyavathy V.Vivekananthan |
| 15 | Enhancing solar cell productivity with MgAl2O4-ZnAl2O4 blended anti-reflection coatings | Surfaces and Interfaces | International | Vol.53, p.104997 October 2024 | Eman A. Mwafy V.K.Gobinath A.A.A.Darwish Mariem M. Motawea G.Raja R.Rajasekar Zaynb El-Tayeb Wafaa B. Elsharkawy Ayman M. Mostafa P.Sathish Kumar |
| 16 | An experimentation of hand-arm tremor control using low-g area-changed capacitive micro-accelerometer | Transactions of the Institute of Measurement and Control | International | Vol.46(14), pp.2742-2756 October 2024 | K.Gomathi S.Sathiyavathi A.Tony Thomas V.Arunkumar |
| 17 | Effect of microseparation and corner radius on contact mechanics and failure of dual mobility implants under regular and physically demanding gait loads | International Journal on Interactive Design and Manufacturing | International | Vol.18, pp.5547-5560 September 2024 | R.Nithyaprakash S.Shankar R.Naveenkumar G.Abbas C.Prakash A.Pramanik A.K.Basak |
| 18 | Prediction of red chilli drying performance in solar dryer with natural energy storage element using machine learning models | Journal of Energy Storage | International | Vol.101, p.113825 September 2024 | P.M.Arunkumar N.Balaji S.Madhankumar T.Mohanraj |
| 19 | Digital twin-based tig welding quality prediction using electrode tip angle degradation influencing Industry 5.0 in manufacturing sector | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | International | Vol.238(4), pp.1926-1940 August 2024 | S.Thangavel C.Maheswari E.B.Priyanka |
| 20 | Achieving effective performance of silicon solar cell through electro sprayed MgF2 antireflection coating | Ceramics International | International | Vol.50(16), pp.28724-28734 August 2024 | Fatemah H. Alkallas Eman A. Mwafy V.K.Gobinath S.Santhosh R.Rajasekar Amira Ben Gouider Trabelsi Wafaa B. Elsharkawy Ayman M. Mostafa P.Sathish Kumar |
| 21 | High gain novel two input two output buck-boost converter for electric vehicle applications | International Journal of Electronics | International | Vol.111(7), pp.1113-1128, 2024 | S.Sathishkumar V.Kamatchi Kannan C.Maheswari S.Albert Alexander |
| 22 | Enhancing photovoltaic cell efficiency: A comprehensive study on BN-Si3N4 blend antireflective coatings and their impact on power conversion | Ceramics International | International | Vol.50(13), July 2024 | Fatemah H. Alkallas Eman A. Mwafy V.K.Gobinath G.Raja R.Rajasekar Amira Ben Gouider Trabelsi Wafaa B. Elsharkawy Ayman M. Mostafa P.Sathish Kumar |
| 23 | Effect of Elevated Acetabular Cup on Contact and Failure Analysis in Hip Implants for Different Micro separations and Cup Inclinations Under Routine Gait Activities using in Silico Approach | Indian Journal of Orthopaedics | International | Vol.58, pp.705-715 June 2024 | R.Nithyaprakash S.Shankar R.Naveenkumar A.K.Raja R.G.Anand G.Abbas Chander Prakash Alokesh Pramanik A.K.Basak |
| 24 | Annealing-induced enhancement of TiO2-ZnO nanocomposites for high-performance room-temperature air pollutant detection in fiber optic sensors | Microchemical Journal | International | Vol.200, p.110329 June 2024 | Subha Krishna Rao B.Renganathan Manjunath S Kamath M.Silambarasan V.K.Gobinath A.R.Ganesan A.Deepak N.Kannapiran K.Guhan Narendhar Chandrasekar |
| 25 | Study of Respiratory Symptoms and Pulmonary Function among Neem Oil Industry Workers | Indian Journal of Occupational and Environmental Medicine | International | Vol.28(2), pp.163-169 June 2024 | S.Shankar G.Abbas R.Naveenkumar R.Nithyaprakash C.Maheswari A.K.Basak |
| 26 | Improving the Groundnut Oil Extraction Efficiency using RSM and Central | Journal of Engineering Science and Technology Review | International | Vol.17(2), pp.215-222 May 2024 | C.Maheswari S.Shankar S.Albert Alexander G.Ramani P.Maheswari |
| 27 | Statistical Analysis on Wear Behavior of Aluminum Alloy2024-Silicon Carbide-Fly Ash Metal Matrix Composites | SAE Technical Paper | International | Vol.2024(1), p.5058 May 2024 | N.Sivakumar S.Sireesha S.Raja P.Ravichandran |
| 28 | Analysis and optimization of the automated TIG welding process parameters on SS304 incorporating Taguchi optimization technique | The Journal of Engineering | International | Vol.3, p.e12373 March 2024 | S.Thangavel C.Maheswari E.B.Priyanka S.Albert Alexander G.Peter V.Ganji |
| 29 | Application of gahnite-reinforced cyclic olefin copolymer cover sheets on Si solar cell for augmenting the power conversion efficiency | Journal of Materials Science: Materials in Electronics | International | Vol.3(10), p.684 March 2024 | G.Raja V.K.Gobinath G.Uma S.Santhosh |
| 30 | Enhanced efficiency of mono-crystalline Si solar cells utilizing RF sputtered TiO2-Al2O3 blended anti-reflection coating for optimal sunlight transmission and energy conversion | Ceramics International | International | Vol.50(9) pp.14865-14877, 2024 | Fatemah H. Alkallas Shoug M. Alghamdi V.K.Gobinath G.Raja R.Rajasekar Amira Ben Gouider Trabelsi W.B. Elsharkawy Ayman M. Mostafa g Sathish Kumar Palaniappan |
| 31 | Performance analysis of Indirect solar dryer with natural heat energy retention substance for drying red chilli | Sustainable energy technologies and assessments | International | Vol.64, p.103706 February 2024 | P.M.Arunkumar N.Balaji S.Madhankumar |
| 32 | Impact of cotton dust, endotoxin exposure, and other occupational health risk due to indoor pollutants on textile industry workers in low and middle-income countries | Journal of Air Pollution and Health | International | Vol.9(1), pp.75-96 February 2024 | S.Shankar R.Naveenkumar G.Abbas R.Nithyaprakash C.Maheswari S.Albert Alexander Chander Prakash Alokesh Pramanik Animesh Kumar Basak |
| 33 | Investigation of indoor air quality and pulmonary function status among power loom industry workers in Tamil Nadu, South India | Atmosphere & Health | International | Vol.17(1) pp.215-230 January 2024 | S.Shankar A.Ganesan N.Raju C.Prakash |
| 34 | Artificial Intelligence Approaches in Healthcare Informatics Toward Advanced Computation and Analysis | The Open Biomedical Engineering Journal | International | Vol.18, e18741207281491 January 2024 | E.B.Priyanka S.Thangavel R.Mohanasundaram Shamala Subramaniam |
| 35 | Surface engineering of Sio2-Zro2 films for augmenting power conversion efficiency performance of silicon solar cells | Materials Research and Technology | International | Vol.28, pp.1475-1482 January 2024 | Amira Ben Gouider Trabelsi Gobinath Velu Kaliyannan Raja Gunasekaran Rajasekar Rathanasamy Sathish Kumar Palaniappan Fatemah H Alkallas WB Elsharkawy Ayman M Mostafa |
| 36 | Short term tribological study of ceramic biomaterials against MgAZ31 under bio-lubricants for hip joint replacements | International Journal of Surface Science and Engineering | International | Vol.17(16) pp.280-294 December 2023 | R.Nithyaprakash S.Shankar R.Naveenkumar G.Abbas S.Sathish P.J.Nithileshwar V.Vishwa Chander Prakash Alokesh Pramanik A.K.Basak Mohammad Uddin |
| 37 | Management of Hand Screen Printing Workers Health using Ergonomic Design Intervention | Journal of Health Management | International | Vol.25(4), December 2023 | S.Shankar S.Pradeep J.Karthick R.Naveenkumar S.Jayaraman |
| 38 | Framework for lean implementation through fuzzy AHP-COPRAS integrated approach | IEEE Transactions on Engineering Management | International | Vol.70(11), November 2023 | M.B.Kumar R.Parameshwaran J.Antony E.Cudney |
| 39 | Semi-Automatic Child Rescuing BOT in Deep Borewell | In E3S Web of Conferences | International | Vol.453, p.01056, 2023 | R.Nithyaprakash S.Shankar R.N.Kumar S.P.Kumar R.Seenivasa S.N.Prasath |
| 40 | Design and Fabrication of Automatic UPS Battery Maintenance System | In E3S Web of Conferences | International | Vol.453, p.01057, 2023 | R.Nithyaprakash S.Shankar R.N.Kumar P.Abinesh R.Abishek B.H.Senthur |
| 41 | Study on the Impact of Firecrackers on Atmospheric Pollutants during Diwali Festival in Tamil Nadu, India | In E3S Web of Conferences | International | Vol.453, p.01004, 2023 | S.Shankar G.Abbas R.Nithyaprakash R.Naveenkumar S.R.Mohanty A.Sabarinathan S.Karthick |
| 42 | Design And Development of Teakwood Bud Pruning Machine using Sustainable Engineering Approach | In E3S Web of Conferences | International | Vol.453, p.01002 November 2023 | S.Shankar C.Maheswari G.Abbas R.Nithyaprakash V.S.Jeganhes S.H.Adhithya M.Gupta |
| 43 | Forecasting and meta-features estimation of wastewater and climate change impacts in coastal region using manifold learning | Environmental Research | International | Vol.240, p.117355 November 2023 | E.B.Priyanka S.Vivek S.Thangavel V.Sampathkumar N.Al-Zaqri I.Warad |
| 44 | Design and fabrication of automatic fertilizer dispenser by NPK ratio | AIP Conference Proceedings | International | Vol.2788(1), 2023 | T.Tamilarasi T.Ragunathan N.V.Ram M.Santhosh K.Karthikeyan S.S.Prasath |
| 45 | Design and fabrication of smart table for physically challenged persons | AIP Conference Proceedings | International | Vol.2788(1), November 2023 | T.Thangamuthu P.V.Ganesan R.Kuttiappan J.Narasimman K.Nagarajan K.Ramachandran A.K.Ravichandran |
| 46 | Design and fabrication of IOT based scissor jack | AIP Conference Proceedings | International | Vol.2788(1), November 2023 | V.G.Pratheep T.Tamilarasi K.Ravichandran M.Srinivasan N.Someswaran S.Vimal S.Praveen |
| 47 | Improved African Buffalo Optimization-Based Takagi-Sugeno-Kang Fuzzy PI Controller for Speed Control in BLDC Motor | Electric Power Components and Systems | International | Vol.51(7), pp.1948-1962 October 2023 | S.Shankar K.K.Vijayarangan C.Maheswari |
| 48 | Analysis on IoT based fault identification in oil pipeline using prognostic algorithm | AIP Conference Proceedings | International | Vol.2564(1), p.030006 October 2023 | E.B.Priyanka S.Thangavel Martin Sagayam Kulandairaj Mohd Helmy Abd Wahab Suzi Iryanti Fadilah |
| 49 | Passive machine vision-based defect classification in tungsten inert gas welding on SS304 using AI-based gradient descent algorithm | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | International | Vol.273(5), pp.2102-2114 October 2023 | S.Thangavel C.Maheswari E.B.Priyanka |
| 50 | Water pollution and carbon dioxide emissions from solid waste landfills: Probabilistic monitoring and evaluation | Global NEST Journal | International | Vol.25(7), pp.78-90 October 2023 | S.VijayaShanthy K.Saravanan E.B.Priyanka V.Sampathkumar |
| 51 | Effect Of Zinc Oxide-Aluminium Oxide Mechanical Blends for Boosting the Polycrystalline Silicon Solar Cell Performance through Antirefection Properties | Silicon | International | Vol.15, pp.6375-6386 October 2023 | V.K.Gobinath Uma Gandhi R.Rajasekar S.Mohankumar K.Suganeswaran G.Raja P.Sathish Kumar |
| 52 | Ergonomic Evaluation of Different Working Posture and Handle Designs of Mason Trowel during Wall Plastering Work based on Shoulder and Arm Muscle Activity | Journal of Scientific & Industrial Research | International | Vol.82(9), pp.938-946 September 2023 | R.Naveen Kumar S.Venkatachalam S.Shankar R.Nithyaprakash A.J.Elavarasan E.Krishnashankar K.Dharmadurai T.V.Srinivasan C.Prakash |
| 53 | Experimental investigation on carbonation due to climate change impacts | Global NEST Journal | International | Vol.25(6), pp.130-141 September 2023 | V.Deivasigamani J.Chandrasekaran G.S.Rampradheep S.Shankar |
| 54 | Microstructural characterization, hardness and impact behavior of AA7075/steel slag surface composites fabricated through multipass friction stir process | Journal of Adhesion Science and Technology | International | Vol.37(17), pp.2423-2439 August 2023 | K.Suganeswaran R.Sathiskumar V.K.Gobinath K.Periasamy R.Parameshwaran N.Nithyavathy |
| 55 | Effects of Abrasive Waterjet Machining on the Quality of the Surface Generated on a Carbon Fibre Reinforced Polymer Composite | Machines | International | Vol.11(7), p.749, July 2023 | A.Rowe A.Pramanik A.K.Basak C.Prakash S.Shankar A.R.Dixit N.Radhika |
| 56 | Microstructural and Micro-mechanical Behaviours of Friction Stir Processed Magnesium Alloy | Journal of Materials Research and Technology | International | Vol.25, pp.6303-6312 July 2023 | A.K.Basak A.Pramanik C.Prakash S.Shankar L.R.Gupta V.Smirnov A.A.Al-Kahtani |
| 57 | Influence of grab handle designs on muscle activation level and fatigue in hand and shoulder muscle during bus travel to prevent non collision injuries | Journal of Ambient Intelligence and Humanized Computing | International | Vol.14, pp.12921-12931, 2023 | S.Shankar R.Naveenkumar R.Nithyaprakash S.M.Mohanty M.Veerakumar S.Venkatachalam |
| 58 | Review on sensor design for cutting force measurement | Proceedings of the Institution of Mechanical Engineers Part E: Journal of Process Mechanical Engineering | International | Vol.237(2), pp.455-466 July 2023 | T.Mohanraj Mohammad Uddin S.K.Thangarasu |
| 59 | Investigations on microstructure, thermo-mechanical and tribological behavior of graphene oxide reinforced AA7075 surface composites developed via friction stir processing | Journal of Manufacturing Processes | International | Vol.90, pp.139-150 June 2023 | S.Ragu Nathan K.Suganeswaran Surya Kumar P.Thangavel V.K.Gobinath |
| 60 | Effect of tool rotational speed on microstructure and mechanical properties of friction stir welded DMR249A high strength low alloy steel butt joints for fabrication of light weight ship building structures | International Journal of Lightweight Materials and Manufacture | International | Vol.6(4), pp.469-482 June 2023 | S.Ragu Nathan V.Balasubramanian A.Gourav Rao Tushar Sonar Mikhail Ivanov K.Suganeswaran |
| 61 | Characterization of AA7075 Surface Composites with Ex-Situ Al2O3/SiC Reinforcements Tailored using Friction Stir Processing | Journal of Materials Engineering and Performance | International | Vol.32, pp.3617-3732 June 2023 | K.Suganeswaran S.Ragu Nathan R.Parameshwaran N.Nithyavathy N.R.Dhineshbabu |
| 62 | Augmentation of crashworthiness design of circular tubular structures by engraving grooves of varying depths | Mechanics of Advanced Materials and Structures | International | Vol.30(15), pp.3097-3110, 2023 | B.Natarajan S.Shankar P.NavaneethaKrishnan D.Karupannasamy S.Chinnasamy S.Rajagopal |
| 63 | Design and Implementation of Iterative Learning Control for an Electro-Hydraulic Servo System | Journal of Scientific & Industrial Research | International | Vol.82(5), pp.579-588 May 2023 | C.Naveen B.Meenakshipriya S.Sathiyavathi |
| 64 | Design and fabrication of automatic banana leaf cutting machine | Materials Today: Proceedings | International | Vol.81(2), pp.776-779, 2023 | S.K.Thangarasu A.T.Thomas A.Shanmugam V.G.Pratheep T.Tamilarasi |
| 65 | Design and fabrication of paver block laying machine | Materials Today: Proceedings | International | Vol.81(2), pp.780-782 May 2023 | A.Shanmugam N.Muralidharan V.G.Pratheep S.K.Thangarasu T.Tamilarasi K.Dhileephan |
| 66 | Automatic idiyaapam maker machine | Materials Today: Proceedings | International | Vol.81(2), pp.783-786 May 2023 | A.Shanmugam N.Muralidharan V.G.Pratheep S.K.Thangarasu T.Tamilarasi A.Heeraj |
| 67 | Investigation of ZrO2 reinforced aluminium metal matrix composites by liquid metallurgy route | Advances in Materials and Processing Technologies | International | Vol.9(2), pp.593-607 May 2023 | N.Muralidharan K.Chockalingam K.Kalaiselvan N.Nithyavathy |
| 68 | Material extrusion additive manufacturing of 17–4 PH stainless steel: effect of process parameters on mechanical properties | Rapid Prototyping Journal | International | Vol.29(5), pp.1097-1106 April 2023 | A.Basak A.Lee A.Pramanik K.Neubauer C.Prakash S.Shankar |
| 69 | Optimization of FSP parameters to fabricate AA7075-based surface composites using Taguchi technique and TOPSIS approach | Journal of Adhesion Science and Technology | International | Vol.37(5), pp.817-841 March 2023 | K.Suganeswaran P.Muthukumar R.Parameshwaran N.Nithyavathy T.Mohanraj K.Deepandurai |
| 70 | Processing household plastics for recycling–A review | Cleaner Materials | International | Vol.6, p.100158, March 2023 | B.Chappell A.Pramanik A.K.Basak P.K.Sarker C.Prakash S.Debnath S.Shankar |
| 71 | Application of additive manufacturing in the biomedical field-A review | Annals of 3D Printed Medicine | International | Vol.10, p.100110 March 2023 | A.Harding A.Pramanik A.K.Basak C.Prakash S.Shankar |
| 72 | Challenges associated with drilling of carbon fiber reinforced polymer (CFRP) composites-A review | Composites Part C | International | Vol.11, p.100356 March 2023 | G.K.Ze A.Pramanik A.K.Basak C.Prakash S.Shankar N.Radhika |
| 73 | Microstructure and micro-mechanical properties of friction stir processed Al 5086-based surface composite | Materials Today Communications | International | Vol.35, p.105830 March 2023 | A.K.Basak A.Pramanik C.Prakash S.Shankar S.S.Sehgal |
| 74 | Investigations on the tribological behaviour, toxicity, and biodegradability of kapok oil bio-lubricant blended with (SAE20W40) mineral oil | Biomass Conversion and Biorefinery | International | Vol.13(5), pp.3669-3681 March 2023 | S.Shankar M.Manikandan D.K.Karupannasamy C.Jagadeesh A.Pramanik A.K.Basak |
| 75 | Employing zinc oxide–tantalum pentoxide blend coatings as eminent light harvester for improving performance of silicon solar cell | Bulletin of Materials Science | International | Vol.46(1), March 2023 | S.Santhosh R.Rajasekar V.K.Gobinath P.Manivasakan |
| 76 | Effect of Molybdenum Disulphide Thin Films on Enhancing the Performance of Polycrystalline Silicon Solar Cells | International Journal of Photoenergy | International | Vol.2023, Article ID: 8532250 March 2023 | R.Rajasekar V.K.Gobinath S.Santhosh Essakkiappan Muthiah Abdul Azeem Ajmal Khaan Dharmaprakash Ravichandran Md Uddin |
| 77 | Paper quality enhancement and model prediction using machine learning techniques | Results in Engineering | International | Vol.17, p.100950 February 2023 | T.Kalavathi Devi E.B.Priyanka P.Sakthivel |
| 78 | Real-Time Implementation of Iterative Learning Control for an Electro-Hydraulic Servo System | IETE Journal of Research | International | Vol.69(2), pp.649-664 February 2023 | C.Naveen B.Meenakshipriya A.Tony Thomas S.Sathiyavathi S.Sathishbabu |
| 79 | Effect of Loads and Bio-Lubricants on Tribological Study of Zirconia and Zirconia Toughened Alumina against Ti6Al4V for hip prosthesis | Surface Review and Letters | International | Vol.30(1), p.2141006 January 2023 | S.Shankar R.Nithyaprakash R.Naveen Kumar R.Aravinthan A.Pramanik A.K.Basak |
| 80 | Tribological Behavior of AZ31 Alloy Against Si3N4 using In-vitro and In-silico Submodeling Approach for Human Hip Prosthesis | Silicon | International | Vol.15(2), pp.983-991 January 2023 | S.Shankar R.Nithyaprakash G.Abbas R.Naveenkumar C.Prakash A.Pramanik A.K.Basak |
| 81 | Application of coolants during tool-based machining-A review | Ain Shams Engineering Journal | International | Vol.14(1), p.101830 January 2023 | K.Z.Yang A.Pramanik A.K.Basak Y.Dong C.Prakash S.Shankar S.Dixit K.Kumar N.I.Vatin |
| 82 | Fabrication of efficient aluminium/graphene nanosheets (Al-GNP) composite by powder metallurgy for strength applications | Journal of Materials Research and Technology | International | Vol.22, pp.3402-3412 January 2023 | V.Khanna V.Kumar S.A.Bansal C.Prakash M.Ubaidullah S.F.Shaikh A.Pramanik A.Basak S.Shankar |
| 83 | Investigation and validation of PV fed reduced switch asymmetric multilevel inverter using optimization based selective harmonic elimination technique | Automatika | International | Vol.64(3), pp.441-452 January 2023 | T.Jayakumar G.Ramani P.Jamuna B.Ramraj G.Chandrasekaran C.Maheswari V.Ganji |
| 84 | Performa of SCARA based intelligent 3 axis robotic soft gripper for enhanced material handling | Advances in Engineering Software | International | Vol.176, p.103366, 2023 | V.P.Dinakaran B.Meenakshipriya M.Suresh H.Panchal |
| 85 | Assessment of erosion rate on AA7075 based surface hybrid composites fabricated through friction stir processing by taguchi optimization approach | Journal of Adhesion Science and Technology | International | Vol.37(5), pp.817-841, 2023 | K.Suganeswaran R.Parameshwaran N.Nithyavathy K.Deepandurai T.Mohanraj P.Muthukumar |
| 86 | Development of service quality model computing ridership of metro rail system using fuzzy system | Results in Engineering | International | Vol.17, p.100946, 2023 | P.Prabhakaran S.Anandakumar E.B.Priyanka S.Thangavel |
| 87 | Frictional study of tungsten carbide mechanical seal under synthetic oil mixed with acrylamide powder lubrication | Jurnal Tribologi | International | Vol.35, pp.1-15 December 2022 | P.Krishna Kumar R.Selvam S.Shankar K.Arun Vasantha Geethan B.Ramesh S.Ashwin Kannan |
| 88 | Determination of the key work posture and muscle fatigue measurements for the ergonomic design of coconut grater using SEMG | International Journal of Business Innovation and Research | International | Vol.29, pp.538-553 December 2022 | R.Naveen Kumar S.Shankar Lakshman Balasubramanium Gokul Chandran Kishore Sasikumar Jannakiraman Sellappan |
| 89 | Study on wear behaviour of Al6061 MMC with nano-MoC | Materials Today: Proceedings | International | Vol.69, pp.1154-1158 December 2022 | F.F.Prabhu K.P.Kumar A.Shanmugam M.Kumar T.S.Senthil J.A.Dhanraj |
| 90 | Multi-type feature extraction and classification of leakage in oil pipeline network using digital twin technology | Journal of Ambient Intelligence and Humanized Computing | International | Vol.13, pp.5885-5901 November 2022 | E.B.Priyanka S.Thangavel |
| 91 | Role of surface quality on biocompatibility of implants-A review | Annals of 3D Printed Medicine | International | Vol.8, p.100082 November 2022 | A.F.Bin Anwar Fadzil A.Pramanik A.K.Basak C.Prakash S.Shankar |
| 92 | Influence of Fly Ash and Emery based particulate reinforced AA7075 surface composite processed through friction stir processing | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | International | Vol.236, No.4 pp.1682-1692 November 2022 | K.Suganeswaran R.Parameshwaran R.Sathiskumar T.Ram Prabhu N.Nithyavathy |
| 93 | Performance analysis of modified shuttle mechanism in polymerized bag weaving circular loom | AIP Conference Proceedings | International | Vol.2446, No.1 p.180028, November 2022 | R.Raffik C.Naveen J.Siyaguru R.Vijayanandh |
| 94 | A Comprehensive Review on Current Performance, Challenges and Progress in Thin-Film Solar Cells | Energies | International | Vol.15, No.22 p.8688, 2022 | Santhosh Sivaraj Rajasekar Rathanasamy Gobinath Velu Kaliyannan Hitesh Panchal Ali Jawad Alrubaie Mustafa Musa Jaber Zafar Said Saim Memon |
| 95 | Characteristics of a solar-driven phase change material with sodium acetate trihydrate and Ti2O3 particle composite | Materials Today: Proceedings | International | Vol.69, No.3 pp.1470-1477 November 2022 | D.Ramya S.Siva Chandran M.Naveenkumar T.Vignesh V.G.Pratheep S.Sandeep Kumar |
| 96 | Performance and quality improvement in a foundry industry using fuzzy MCDM and lean methods | Arabian Journal for Science and Engineering | International | Vol.47, pp.15379-15390 November 2022 | N.Senthil Kannan R.Parameshwaran P.T.Saravanakumar P.M.Kumar M.L.Rinawa |
| 97 | Influence of Silicon Dioxide-Titanium Dioxide Antireflective Electrosprayed Coatings on Multicrystalline Silicon Cells | Advances in Materials Science and Engineering | International | Vol.2022, October 2022 | Rajasekar Rathanasamy Gobinath Velu Kaliyannan Santhosh Sivaraj Abishek Saminathan Bharathikannan Krishnan Dhayananth Palanichamy Md Uddin |
| 98 | Effective Utilization of Synthesized FeS2 for Improving Output Performance of Polycrystalline Silicon Solar Cell | Advances in Materials Science and Engineering | International | Vol.2022, October 2022 | M.Chinnasamy R.Rathanasamy S.Sivaraj G.Velu Kaliyannan M.Palanisamy S.K.Pal M.Uddin |
| 99 | Experimental analysis and parameter optimization on the reduction of NOx from diesel engine using RSM and ANN Model | Environmetal science and pollution research | International | Vol.29, pp.66068–66084 September 2022 | C.Maheswari S.Ramya R.Baskar |
| 100 | Evaluation of the Efficacy in Ergonomically Designed Handsaw to Minimize the Muscular Load on Arm and Shoulder Muscles among Carpenters | Journal of The Institution of Engineers (India): Series C | International | Vol.103, No.5 pp.1125-1132 September 2022 | R.Naveenkumar S.Shankar R.Nithyaprakash D.Hariprasath G.Moulidaman C.Prakash |
| 101 | Ultra-precision diamond Processing of biodegradable AZ31 alloy for orthopaedic application | Surface Review and Letters | International | Vol.29, No.9 p.2250116, September 2022 | Prakash Chander Sunpreet Singh Vinod Mishra Rohit Sharma Kundan Kumar Prasad Vinod Karar Alokesh Pramanik S.Shankar Dharam Buddhi |
| 102 | Study and performance analysis of graphite and aluminium oxide coating on heat spreader application | Materials Today Proceedings | International | Vol.66, No.3 pp.1066-1073 September 2022 | T.Tamilarasi V.G.Pratheep R.Rajasekar K.Ravichandran A.Shanmugam H.Sriraam N.Jagan |
| 103 | Experimental investigation on IoT interfaced smart gardening system with human path clearance | Materials Today: Proceedings | International | Vol.66, No.3 pp.1419-1423, 2022 | K.Gomathi A.Balaji S.V.Shanthy T.Jeevetha J.Mithil |
| 104 | Effect of particle size on mechanical behavior of sugarcane bagasse ash reinforced AlSi10Mg alloy | Materials Today: Proceedings | International | Vol.66, No.3 pp.1276-1283 September 2022 | A.Balaji K.Gomathi U.N.Rajan J.Mithil A.Vinunath R.C.Vagish |
| 105 | Finite element methods in analyzing contact mechanics to estimate the wear of hard biomaterials in human hip prosthesis - A review | Jurnal Tribology | International | Vol.33, pp. 39-70, 2022 | S.Shankar R.Nithyaprakash R.Naveenkumar G.Abbas M.S.Uddin A.Pramanik A.K.Basak Chander Prakash |
| 106 | Effect of Radial Clearance, Corner Radius and Micro Lateralization on Contact Stress of Metallic and Ceramic Hip Prosthesis A Finite Element Analysis | Defence Science Journal | International | Vol.72, No.3 pp.441-449, 2022 | S.Shankar R.Nithyaprakash K.A.Selvamani K.Ponappa Mohammad Uddin B.R.Santhosh |
| 107 | Surface engineering of chromium films for augmenting bird striking performance of jet engine blades | Materials Testing | International | Vol.64, No.6 pp.884-892, 2022 | V.K.Gobinath G.Raja B.Meenakshipriya A.T.Anand K.Krupha Shankar |
| 108 | Tribo-mechanical behaviour of aluminium alloy (AlSi10Mg) reinforced with palmyra shell ash and silicon carbide particles | Metallurgical Research & Technology | International | Vol.119, No.3 pp.1-9, 2022 | S.Shankar R.Naveenkumar E.Shanmugam R.Nithyaprakash A.Pramanik A.K.Basak Chander prakash A.K.Gur |
| 109 | Study of Mechanical Properties on Ferric Oxide Microparticles Reinforced with Polyethylene | Advances in Materials Science and Engineering | International | Vol. 2022 Article ID: 3077301, 2022 | U.Tamilarasan S.Dhanasekar K.Raja T.S.Karthikeyan R.Ramesh Babu V.G.Gopinathan P.Pratheep R.Ram Subbiah S.Praveen Kumar |
| 110 | Prediction of Fault Occurrences in Smart City Water Distribution System using Time-Series Forecasting Algorithm | Mathematical Problems in Engineering | International | Vol.2022 Article ID: 9678769, 2022 | C.Maheswari G.Divya G.Kavi Priya R.R.Rajalakshmi A.S.Ramya S.Albert Alexander Geno Peter Vivekananda Ganji |
| 111 | Performance improvement of hybrid image watermarking algorithm using discrete wavelet transform and human visual model. | NeuroQuantology | International | Vol.20, No.8 pp.900-909, 2022 | V.Sundhararaja B.Meenakshipriya P.Nirmaladevi |
| 112 | Material recovery and recycling of waste tyres-A review | Cleaner Materials | International | Vol.5, p.100115, 2022 | Z.Xiao A.Pramanik A.K.Basak C.Prakash S.Shankar |
| 113 | Progress and challenges on extrusion based three dimensional (3D) printing of biomaterials | Bioprinting | International | Vol.27, p.e00223, 2022 | M.Vu A.Pramanik A.K.Basak C.Prakash S.Shankar |
| 114 | A computational design of robotic grasper by intelligence-based topology optimization for microassembly and micromanipulation | Robotics and Autonomous Systems | International | Vol.156, p.104209, 2022 | N.T.Tran M.P.Dang A.Pramanik A.K.Basak S.Shankar D.Buddhi T.P.Dao |
| 115 | Rank-based risk target data analysis using digital twin on oil pipeline network based on manifold learning | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | International | Vol.236, No.4 pp.1637-1651, 2022 | E.B.Priyanka S.Thangavel Priyanka Prabhakaran |
| 116 | Surface coatings of zinc oxide–tantalum pentoxide on multicrystalline Si solar cell as effective light harvester | Journal Material Science: Materials in Electronics | International | Vol.33, pp.17699-17710, 2022 | S.Santhosh R.Rajasekar V.K.Gobinath P.Manivasakan |
| 117 | Influence of Fly Ash and Emery based particulate reinforced AA7075 surface composite processed through friction stir processing, Proceedings of the Institution of Mechanical Engineers | Part E: Journal of Process Mechanical Engineering | International | Vol.236, No.4 pp.1682-1692, 2022 | K.Suganeswaran R.Parameshwaran R.Sathiskumar T.Ram Prabhu N.Nithyavathy |
| 118 | Artificial Intelligence Technologies for Forecasting Air Pollution and Human Health: A Narrative Review | Sustainability | International | Vol.14, No.16 p.9951, 2022 | S.Shankar R.Naveenkumar G.Abbas R.Nithyaprakash C.Maheswari Chander Prakash Alokesh Pramanik Animesh Kumar Basak Saurav Dixit |
| 119 | Development of GGBS-Based Geopolymer Concrete Incorporated with Polypropylene Fibers as Sustainable Materials | Sustainability | International | Vol.14, No.17 p.10639, 2022 | Thakur Gaurav Yatendra Singh Rajesh Singh Chander Prakash Kuldeep K. Saxena Alokesh Pramanik Animesh Basak S.Shankar |
| 120 | Synthesis of functionalized HAp-surface on ?-Ti alloy using ball-burnishing assisted EDC process for biomedical application | Archives of Civil and Mechanical Engineering | International | Vol.22, No.4 pp.1-15, 2022 | C.Prakash K.Kotecha A.Pramanik A.Basak S.Shankar |
| 121 | Model development synchronized with data mining for rolling stock maintenance strategy | Advances in Mechanical Engineering | International | Vol.14, No.8 p.16878132221117124, 2022 | P.Prabhakaran S.Anandakumar E.B.Priyanka P.Velusamy |
| 122 | Effect of Dwell Time on Fracture Load of Friction Stir Spot Welded Dissimilar Metal Joints | Advances in Materials Science and Engineering | International | Vol.2022 Article ID: 2163507, 2022 | P.Sathyaseelan V.M.Manickavasagam P.Ravichandran D.V.S.S.S.V.Prasad S.C.V.Ramana Murty Naidu S.Pradeep Kumar Ateeb Ahmad Khan R.Karthik Gizachew Assefa Kerga |
| 123 | Improved position tracking performance of electro hydraulic actuator using PID and sliding mode controller | IETE Journal of research | International | Vol.68, No.3 pp.1683 – 1695, 2022 | A.Tony Thomas R.Parameshwaran S.Sathiyavathi A.Vimala Starbino |
| 124 | CNC wire-cut EDM input variables analysis on Ni-based superalloy (MONEL K-500) | Materials and Manufacturing Processes | International | Vol.37, pp 1-10 May 2022 | A.G.Karthikeyan K.Kalaiselvan N.Muralidharan |
| 125 | A case study on thermo-hydraulic performance of jet plate solar air heater using response surface methodology | Case Studies in Thermal Engineering | International | Vol.34, p.101983 May 2022 | M.M.Matheswaran T.V.Arjunan S.Muthusamy L.Natrayan H.Panchal S.Shankar N.K.Khedkar A.S.El-Shafay C.Sonawane |
| 126 | A critical review on additive manufacturing of Ti-6Al-4V alloy: microstructure and mechanical properties | Journal of Materials Research and Technology | International | Vol.18 pp.4641-4661 May 2022 | H.D.Nguyen A.Pramanik A.K.Basak Y.Dong C.Prakash S.Debnath S.Shankar I.S.Jawahir S.Dixit D.Buddhi |
| 127 | Studies on diesel engine exhaust gas for retrieving the waste heat through Triple Tube Heat Exchanger (TTHE) through different tubes | Energy Sources, Part A: Recovery, Utilization, and Environmental Effects | International | Vol.44, No.2 pp.4149-4164 May 2022 | M.Raman P.Saravanan S.Muthusamy S.Shankar |
| 128 | Impact of digital boards on hand and neck muscle activity during online teaching process | Education and Information Technologies | International | Vol.27, No.4 pp.5627-5640 May 2022 | S.Shankar R.Naveenkumar R.Nithyaprakash S.Narmatha R.R.Sai M.Nandhakumar |
| 129 | Strength and durability performance of modified cement-based concrete incorporated immobilized bacteria | Environmental Science and Pollution Research | International | Vol.29, No.15 pp.21670-21681 May 2022 | M.Dhivakar Karthick G.S.Rampradheep S.Shankar |
| 130 | Wireless network upgraded with artificial intelligence on the data aggregation towards the smart internet applications | International Journal of System Assurance Engineering and Management | International | Vol.13, No.3 pp.1254-1267, 2022 | E.B.Priyanka S.Thangavel K.M.Sagayam A.A.Elngar |
| 131 | Assessment of Rotational Speed and Plunge Rate on Lap Shear Strength of FSSW Joints of AA7075/Mild Steel | Advances in Materials Science and Engineering | International | Vol.2022 Article ID:6215249 May 2022 | G.Ramya S.Pounrajan D.V.S.S.S.V.Prasad S.Soni P.Ravichandran K.Kosanam S.A.Amara L.G.Gopala Gupta P.M.Dinesh Leevesh Kumar B.Shaik |
| 132 | Performance Enhancement of Polycrystalline Silicon Solar Cell through Sputter Coated Molybdenum Disulphide Surface Films | Materials Science | International | Vol.28, No.2 May 2022 | S.Prashanth R.Rajasekar V.K.Gobinath S.Santhosh C.Moganapriya A.Manju Sri |
| 133 | Real-time performance analysis of multiple parameters of automotive sensors can data to predict vehicle driving efficiency | International Journal of Computing and Digital System | International | Vol.11, No.1 pp.1337-1357 April 2022 | E.B.Priyanka M.G.Shankar S.Tharun S.Ravisankar S.N.Saravanan B.B.Kumar C.Pugazhenthi |
| 134 | Dry Machining Performance Studies on TiAlSiN Coated Inserts in Turning of AISI 420 Martensitic Stainless Steel and Multi-Criteria Decision Making using Taguchi - DEAR Approach | Silicon | International | Vol.14, No.8 pp.4183-4196, 2022 | C.Moganapriya R.Rajasekar T.Mohanraj V.K.Gobinath P.Sathish Kumar C.Poongodi |
| 135 | Assessment of erosion rate on AA7075 based surface hybrid composites fabricated through friction stir processing by taguchi optimization approach | Journal of Adhesion Science and Technology | International | Vol.36, No.6 pp.584-605 March 2022 | K.Suganeswaran R.Parameshwaran N.Nithyavathy K.Deepandurai T.Mohanraj P.Muthukumar |
| 136 | Design and Development of Medicine Retrieval Robot for Pharmaceutical Application | Lecture Notes in Electrical Engineering | International | Vol.834, pp.301-307 March 2022 | V.G.Pratheep T.Tamilarasi K.Ravichandran A.Shanmugam S.K.Thangarasu A.Prenitha |
| 137 | Study of heat transfer characteristics on steel tube boilers by the application of zinc oxide and graphene coatings | Multiscale and Multidisciplinary Modeling, Experiments and Design | International | Vol.5, pp.91-104 March 2022 | V.G.Pratheep T.Tamilarasi E.B.Priyanka S.Thangavel G.Pranesh |
| 138 | Tribological behavior of zirconia-toughened alumina (ZTA) against Ti6Al4V under different bio-lubricants in hip prosthesis using experimental and finite element concepts | Materials Letters | International | Vol.307, p.131107, 2022 | S.Shankar R.Nithyaprakash G.Abbas R.N.Kumar A.Pramanik A.K.Basak C.Prakash |
| 139 | Understanding the Micro-Mechanical Behaviour of Recast Layer Formed during WEDM of Titanium Alloy | Metals | International | Vol.12, No.2, p.188, 2022 | A.Basak A.Pramanik C.Prakash S.Shankar S.Debnath |
| 140 | Sustainability in drilling of aluminum alloy | Cleaner Materials | International | Vol.3, p.100048, 2022 | A.Pramanik A.K.Basak C.Prakash S.Shankar S.Chattopadhyaya |
| 141 | Practical profile tracking for a hydraulic press using sliding mode controller | Journal of Mechanical Engineering Science | International | Vol.236, No.2 pp.1202-1213, 2022 | A.Tony Thomas R.Parameshwaran S.Sathiyavathi A.Vimala Starbino |
| 142 | Low complexity modified viterbi decoder with convolution codes for power efficient wireless communication | Wireless Personal Communications | International | Vol.122, No.1 pp.685-700, 2022 | T.Kalavathi Devi E.B.Priyanka P.Sakthivel A.Stephen Sagayaraj |
| 143 | A fuzzy gray-based decision-making approach on the selection of lean tools: a case study of indian apparel industry | International Journal of Industrial Engineering: Theory, Applications, and Practice | International | Vol.29, No.1, 2022 | B.K.Manickam P.Rathinasamy |
| 144 | Digital twin for oil pipeline risk estimation using prognostic and machine learning techniques | Journal of industrial information Integration | International | Vol.26, p.100272, 2022 | E.B.Priyanka S.Thangavel X.Z.Gao N.S.Sivakumar |
| 145 | In-vitro tribological study and submodeling finite element technique in analyzing wear of zirconia toughened alumina against alumina with bio-lubricants for hip implants | Medical Engineering & Physics | International | Vol.98, pp.83-90, 2021 | S.Shankar R.Nithyaprakash G.Abbas A.Pramanik A.K.Basak C.Prakash |
| 146 | IoT based Rash Braking Data Analysis and Plotting in Google Maps using Raspberry Pi | International Conference on Data Analytics for Business and Industry | International | pp. 320-325, 2021 | E.B.Priyanka S.Thangavel S.Tharun S.Naveen Saravanan S.Ravi Sankar B.Bharath Kumar C.Pugazhenthi |
| 147 | An Enhanced Exploration and Exploitation of Modified Grey Wolf Optimizer for Fuzzy Rules Reduction in Cloud Intrusion Detection System (CIDS) | Scientific and Technical Journal of Information Technologies, Mechanics and Optics | International | Vol.21, No.6 pp.912-918, 2021 | C.Bagyalaksmi E.S.Samundeeswari V.Arunkumar |
| 148 | Recast Layer Formation during Wire Electrical Discharge Machining of Titanium (Ti-Al6-V4) Alloy | Journal of Materials Engineering and Performance | International | Vol.30, pp.8926-8935, 2021 | A.Pramanik A.K.Basak C.Prakash S.Shankar S.Sharma S.Narendranath |
| 149 | Multi-Response Optimization on Abrasive Waterjet Machining of Glass Fiber Reinforced Plastics using Taguchi Method Coupled with Topsis | Surface Review and Letters | International | Vol.28, No.12 p.2150120, 2021 | A.Shanmugam T.Mohanraj K.Krishnamurthy A.K.Gur |
| 150 | Optimization of friction stir process parameters for fabrication of AA7075/TiO2 based surface composites | Surface Topography: Metrology and Properties | International | Vol .9, p.045036 November 2021 | S.Kandasamy N.Nithyavathy R.Parameshwaran K.Deepandurai P.Muthukumar |
| 151 | Use of duck feather waste as a reinforcement medium in polymer composites | Cleaner Materials | International | Vol.1, p.100014 November 2021 | A.K.Basak M.R.Hossain A.Pramanik D.R.Shah C.Prakash S.Shankar S.Debnath |
| 152 | IoT Fusion Based Model Predictive PID Control Approach for Oil Pipeline Infrastructure | International Journal of Critical Infrastructure Protection | International | Vol.35, p.100485 October 2021 | E.B.Priyanka S.Thangavel P.Hare Prasad R.Mohanasundaram |
| 153 | Experimental investigation of the magnetic abrasive finishing of SS310s | Materials Testing (Degruter) | International | Vol.63, No.9 pp.878-884 October 2021 | K.Suganeswaran R.Parameshwaran T.Mohanraj B.Meenakshipriya N.Nithyavathy |
| 154 | Spinel zinc ferrite nanostructured thin-films for enhanced light-harvesting in polycrystalline solar cells | Material science poland | International | Vol.39, No.1 pp.24-32 October 2021 | S.Arun Kumar R.Rajasekar V.K.Gobinath N.Nithyavathy P.Manivasakan |
| 155 | Enhanced power conversion efficiency of the polycrystalline solar cells using spinel MnFe2O4 nanoparticles as an ARC material | Journal of Ovonic Research | International | Vol.17, No.5 pp.421-427 October 2021 | S.Arun Kumar R.Rajasekar N.Nithyavathy V.K.Gobinath S.Santhosh |
| 156 | Occupational physical risk factors and prevalence of musculoskeletal disorders among the traditional lacquerware toy makers of South India | Work | International | Vol.70, No.2 pp.405-418 October 2021 | P.K.Hanumegowda S.Gnanasekaran S.Shankar A.Honnappa |
| 157 | Miniaturized antenna design for communication establishment of peer-to-peer communication in the oil pipelines | Petroleum Research | International | Vol.6, pp.291-302 September 2021 | E.B.Priyanka S.Thangavel T.Kalavathidevi |
| 158 | FPGA Implementation of Balanced Biorthogonal Multiwavelet using Direct Pipelined Mapping Method for Image Compression Applications. | Sensing and Imaging | International | Vol.22, No.1 pp.1-19 September 2021 | T.Kalavathi Devi E.B.Priyanka P.Sakthivel |
| 159 | Analysis and optimization on the biodegradable plate making process parameters using RSM-based Box–Behnken Design method | Journal of Material Cycles and Waste Management | International | Vol.23, No.6 pp.2255-2265 September 2021 | C.Maheswari A.Ramya B.M.Priya S.Sudhahar B.Prabhu Raj B.Lokesh G.Ramani |
| 160 | Effect of Radial Clearance, Ellipsoidal and Corner Radius on Contact Mechanics of Metallic and Ceramic Implants Under Fixed Micro-Lateralization: A Finite Element Analysis | Trends in Biomaterials & Artificial Organs | International | Vol.35, No.3 pp.247-254 August 2021 | S.Shankar R.Nithyaprakash K.A.Selvamani R.N.Kumar |
| 161 | Preparation and study on thermophysical properties of inorganic salt hydrate as energy storage materials | Materials Today: Proceedings | International | Vol.42, pp.450-456 August 2021 | R.Prakash B.Meenakshipriya R.Kumaravelan S.Vijayan |
| 162 | Modeling and Simulation of an Electro-Hydraulic System using Fuzzy Logic Approach | Fluid Mechanics and Fluid Power Springer, Singapore | International | pp.807-822, 2021 | A.Tony Thomas S.K.Thangarasu T.Sowmithra |
| 163 | Prediction of tool wear in milling of Inconel 625 using and integrated kurtosis-based algorithm with vibration signals | In Journal of Physics: Conference Series, IOP Publishing | International | Vol.1969, No.1 p.012048, 2021 | T.Mohanraj A.Shanmugam |
| 164 | Feasibility of applying nonthermal plasma for dairy effluent treatment and optimization of process parameters | Water and Environment Journal | International | Vol.35, pp.1038-1050 August 2021 | S.Ramya R.Baskar C.Maheswari P.Manikandan |
| 165 | Structural analysis of mini drone developed using 3D printing technique | Materials Today: Proceedings | International | Vol.46, No.17 pp.8748-8752 August 2021 | N.Muralidharan V.G.Pratheep A.Shanmugam A.Hariram P.Dinesh B.Visnu |
| 166 | An Experimental Work Of TCP SYN Flood Ddos Attack On Cloud Environment – Simulation Approach | International Journal of Aquatic Science | International | Vol.12, No.3 pp.1285-1293 August 2021 | C.Bagyalakshmi E.S.Samundeeswari V.Arun Kumar |
| 167 | Surface engineering of zinc sulphide film for augmenting the performance of polycrystalline silicon solar cells | Chalcogenide Letters | International | Vol.18, No.7 pp.375-384 July 2021 | V.K.Gobinath R.Rajasekar C.Moganapriya A.Manju Sri G.Raja P.Sathish Kumar S.K.Jaganathan |
| 168 | Drilling of titanium alloy (Ti6Al4V)–A review | Machining Science and Technology | International | Vol.25, No.4 pp.637-702 July 2021 | C.G.Yuan A.Pramanik A.K.Basak C.Prakash S.Shankar |
| 169 | Tribological behavior of silicon nitride-based ceramics - A review | Jurnal Tribologi | International | Vol.29, pp.57-71 June 2021 | S.Shankar R.Nithyaprakash G.Abbas A.Pramanik Animesh Kumar Basak |
| 170 | Investigation on mechanical properties and characterization of microwave cladded stainless steel | Journal of Non-Oxide Glasses | International | Vol.13, No.2 pp.13–19 June 2021 | S.Babu T.Pridhar R.Srinivasana A.Karthikeyan M.Dhanasekaran V.G.Pratheep |
| 171 | Influence of temperature and volume fraction on the thermophysical properties of CuO-R134a nano refrigerant and its application in battery thermal management system | Part E: Journal of Process Mechanical Engineering | International | Vol.235, No.3 pp.660-669 June 2021 | S.Senthilraja P.Ravichandran R.Gangadevi |
| 172 | Dynamic modeling and control analysis of industrial electromechanical servo positioning system using machine learning technique | Journal of Testing and Evaluation | International | Vol.49, pp.2425-2440 June 2021 | S.Thangavel C.Maheswari E.B.Priyanka |
| 173 | Tool condition monitoring of PCB milling machine based on vibration analysis | Materials Today: Proceedings | International | Vol.45, No.2 pp.3386-3397 June 2021 | K.Gomathi A.Balaji |
| 174 | Design and optimization of a differential capacitive micro accelerometer for vibration measurement | Journal of the Mechanical Behavior of Materials | International | Vol.30, pp.19–27 June 2021 | K.Gomathi A.Balaji T.Mrunalini |
| 175 | Design, fabrication, and performance analysis of intelligent mesoscale capacitive accelerometer for vibration measurement | Journal of Testing and Evaluation | International | Vol.49, No.4 pp.2407-2424 June 2021 | K.Gomathi R.Sakthivel S.Joseph John Marshal V.G.Pratheep |
| 176 | Genetic algorithm–based robust controller for an inverted pendulum using model order reduction | Journal of Testing and Evaluation | International | Vol.49, No.4 pp.2441–2455 June 2021 | V.G.Pratheep E.B.Priyanka S.Thangavel K.Gomathi |
| 177 | Utilisation of transition metal chalcogenide MoSe2as promising antireflective coating for achieving intensified light traption | Chalcogenide Letters | International | Vol.18, No.6 pp.327 -337 June 2021 | S.Santhosh R.Rajasekar V.K.Gobinath C.Moganapriya A.Manju Sri |
| 178 | Tribological behavior of silicon nitride-based ceramics - A review | Jurnal Tribologi | International | Vol.29, pp.57-71, June 2021 | S.Shankar R.Nithyaprakash G.Abbas A.Pramanik Animesh Kumar Basak |
| 179 | Investigation on mechanical properties and characterization of microwave cladded stainless steel | Journal of Non-Oxide Glasses | International | Vol.13, No.2 pp.13 – 19 June 2021 | S.Babu T.Pridhar R.Srinivasana A.Karthikeyan M.Dhanasekaran V.G.Pratheep |
| 180 | Influence of temperature and volume fraction on the thermophysical properties of CuO-R134a nano refrigerant and its application in battery thermal management system | Part E: Journal of Process Mechanical Engineering | International | Vol.235, No.3 pp.660-669 June 2021 | S.Senthilraja P.Ravichandran R.Gangadevi |
| 181 | Dynamic modeling and control analysis of industrial electromechanical servo positioning system using machine learning technique | Journal of Testing and Evaluation | International | Vol.49, pp.2425-2440 June 2021 | S.Thangavel C.Maheswari E.B.Priyanka |
| 182 | Tool condition monitoring of PCB milling machine based on vibration analysis | Materials Today: Proceedings | International | Vol.45, No.2 pp.3386-3397 June 2021 | K.Gomathi A.Balaji |
| 183 | Design and optimization of a differential capacitive micro accelerometer for vibration measurement | Journal of the Mechanical Behavior of Materials | International | Vol.30, pp.19–27 June 2021 | K.Gomathi A.Balaji T.Mrunalini |
| 184 | Design, fabrication, and performance analysis of intelligent mesoscale capacitive accelerometer for vibration measurement | Journal of Testing and Evaluation | International | Vol.49, No.4 pp.2407-2424 June 2021 | K.Gomathi R.Sakthivel S.Joseph John Marshal V.G.Pratheep |
| 185 | Genetic algorithm–based robust controller for an inverted pendulum using model order reduction | Journal of Testing and Evaluation | International | Vol.49, No.4 pp.2441–2455 June 2021 | V.G.Pratheep E.B.Priyanka S.Thangavel K.Gomathi |
| 186 | Utilisation of transition metal chalcogenide MoSe2as promising antireflective coating for achieving intensified light traption | Chalcogenide Letters | International | Vol.18, No.6 pp.327 -337 June 2021 | S.Santhosh R.Rajasekar V.K.Gobinath C.Moganapriya A.Manju Sri |
| 187 | Short term tribological behavior of ceramic and polyethylene biomaterials for hip prosthesis | Materials Testing | International | Vol.63, No.5 pp.470-473 May 2021 | S.Shankar R.Nithyaprakash B.R.Santhosh |
| 188 | Investigation and analysis of corn cob, coir pith with wood plastic composites | Materials Today Proceedings | International | Vol.45, pp.549-555 May 2021 | V.G.Pratheep E.B.Priyanka S.Thangavel J.Jason Gousanal P.T.Bijoy Antony E.D.Kavin |
| 189 | Examination of B4C-FeCrC Composite Layer During Dry Sliding using Statistical Method | Surace Review and Letters | International | Vol.28, No.5 p.2150034, May 2021 | Gur Ali Kaya Icen Busra S.Shankar T.Mohanraj |
| 190 | Development of comfort fit lower limb prosthesis by reverse engineering and rapid prototyping methods and validated with gait analysis | International Journal of Biomedical Engineering and Technology | International | Vol.35, No.4 pp.362-381, 2021 | K.Chockalingam N.Jawahar N.Muralidharan K.Balachandar |
| 191 | Effect of thrust force, torque, and induced temperature on Kevlar reinforced composites during drilling process | Materials Today: Proceedings | International | Vol.45, pp.522–528 May 2021 | A.Mohan Kumar R.Parameshwaran R.Rajasekar V.H.Ragavendra N.Praveenraj |
| 192 | Experimental studies on viscosity, thermal and tribological properties of vegetable oil (kapok oil) with boric acid as an additive | Journal of Micro & Nano Letters | International | Vol.16, No.5 pp.290-298 April 2021 | S.Shankar M.Manikandan G.Raja G.Suganya Priyadharashini Alokesh Pramanik |
| 193 | Analysis of motor cycle helmet under static and dynamic conditions considering different materials | Materials Today: Proceedings | International | Vol.43, No.2 pp.1098-1102 April 2021 | S.Shankar R.Nithyaprakash S.Praveen S.Sathish Kumar A.M.Sriram |
| 194 | Investigating the Efficacy of Adhesive Tape for Drilling Carbon Fibre Reinforced Polymers | Materials | International | Vol.14, No.7 p.1699, April 2021 | C.Prakash A.Pramanik A.K.Basak Y.Dong S.Debnath S.Shankar S.Singh Wu LY Zheng HY |
| 195 | Augmenting the performance of photovoltaic cell through surface coating of molybdenum disulphide | Chalcogenide Letters | International | Vol.18, No.4 pp.161 – 170 April 2021 | S.Prashanth R.Rajasekar V.K.Gobinath G.Raja K.Subha K.S.Manjunath |
| 196 | Proliferative Diabetic Retinopathy Diagnostic Investigation Using Retinal Blood Vessels Mining Technique | Sensing and Imaging | International | Vol.22, No.10 April 2021 | M.Ponnibala E.B.Priyanka S.Thangavel |
| 197 | IoT Based monitoring and control of fluid transportation using machine learning | Computers & Electrical Engineering | International | Vol.89, p.106899, 2021 | E.B.Priyanka C.Maheswari S.Thangavel M.Ponnibala T.Kalavathidevi N.S.Sivakumar |
| 198 | Experimental Analysis of Tribological Behaviour of Jute Fiber-Reinforced Nanoclay Filled Epoxy Composites | Materials, Design, and Manufacturing for Sustainable Environment, Lecture Notes in Mechanical Engineering | International | p.496754, January 2021 | S.Ramakrishnan K.Krishnamurthy G.Rajeshkumar |
| 199 | Design Fabrication and Control of Soft Robotic Gripper for Material Handling | Materials, Design, and Manufacturing for Sustainable Environment, Lecture Notes in Mechanical Engineering | International | p.496754, January 2021 | D.Venkatesa Prabu B.Meenaskhi Priya E.B.Priyanka |
| 200 | Automatic Body Posture Corrector for Spinal Cord Patients | Materials, Design, and Manufacturing for Sustainable Environment, Lecture Notes in Mechanical Engineering | International | p.496754, January 2021 | V.G.Pratheep E.B.Priyanka S.Thangavel K.Heenalisha M.Ariya Manickam A.P.Logaram |
| 201 | Design Fabrication and Control of Soft Robotic Gripper for Material Handling | Lecture notes on Materials, Design, and Manufacturing for Sustainable Environment | International | Vol.496754, pp.1-10, 2021 | D.Venkatesa Prabu B.Meenaskhi Priya E.B.Priyanka |
| 202 | Automatic Body Posture Corrector for Spinal Cord Patients | Lecture notes on Materials, Design, and Manufacturing for Sustainable Environment | International | Vol.496754, pp.1-10, 2021 | V.G.Pratheep E.B.Priyanka S.Thangavel K.Heenalisha KM.Ariya Manickam A.P.Logaram |
| 203 | Treatment possibilities of electrical discharge non-thermal plasma for industrial wastewater treatment-review | IOP Conference Series: Materials Science and Engineering | International | Vol.1055, No.1 p.012018, 2021 | S.Ramya R.Baskar C.Maheswari P.Manikandan |
| 204 | LABVIEW Based Simulation on Welding Seam Tracking Using Edge Detection Technique | IOP Conference Series: Materials Science and Engineering | International | Vol.1055, No.1 p.012026, 2021 | R.Parameshwaran C.Maheswari N.Nithyavathy R.Rishab Govind N.Selvakumar N.Robin Deva Dharshan M.Vasanth |
| 205 | Review on Online Monitoring and Control in Industrial Automation–An IoT Perspective | IOP Conference Series: Materials Science and Engineering | International | Vol.1055, No.1 p.012034, 2021 | C.Maheswari AAB.Perinchery E.B.Priyanka K.S.Ambika S.Narmatha A.Prenitha M.Monisha |
| 206 | Design and fabrication of fresh juice vending machine for commercial applications | IOP Conference Series: Materials Science and Engineering | International | Vol.1055, No.1 p.012010, 2021 | M.J.Rooshan S.Shankar R.Nithyaprakash |
| 207 | Design and fabrication of multitasking transit robot | IOP Conference Series: Materials Science and Engineering | International | Vol.1057, No.1 p.012034, 2021 | V.G.Pratheep T.Tamilarasi K.Dhileephan Alwin J.Antony A.Heeraj M.Akash |
| 208 | Design and Analysis of six DOF Robotic Manipulator | IOP Conference Series: Materials Science and Engineering | International | Vol.1055, No.1 p.012005, 2021 | V.G.Pratheep M.Chinnathambi E.B.Priyanka P.Ponmurugan Pridhar Thiagarajan |
| 209 | Snake Robots for Rescue Operation | IOP Conference Series: Materials Science and Engineering | International | Vol.1055, No.1, 2021 | V.Arunkumar B.Adithya P.T.Bijoy Antony |
| 210 | Design and Fabrication of Octopod for Survey and Rescue Operation | IOP Conference Series: Materials Science and Engineering | International | Vol.1055, No.1, 2021 | V.Arunkumar B.Meenakshipriya P.B.Antony B.Adithya M.H.Vikinesh |
| 211 | Condition Monitoring of 3D Printer Using Micro Accelerometer | IOP Conference series: Materials Science and Engineering | International | Vol.1055, No.1 p.012035, 2021 | K.Gomathi T.Ganesh J.Bharanidharan A.P.Arvindh Prajathkar R.Aravinthan |
| 212 | Design and Fabrication of Low Cost 3D Printer | IOP Conference series: Materials Science and Engineering | International | Vol.1055, No.1 p.012036, 2021 | K.Gomathi Arangamuthalvan Deepigkashri C B.Dharnieshwaran S.Dhivya C.Praveen |
| 213 | Design of Dual Copter for Surveillance Applications | IOP Conference Series: Materials Science and Engineering | International | Vol.1012, No.1 p.012021, 2021 | A.Balaji J.Mithil J.Jason Gousanal |
| 214 | Design and Analysis of Universal Gripper for Robotics Applications | IOP Conference Series: Materials Science and Engineering | International | Vol.1012, No.1 p.012006, 2021 | A.Balaji J.Mithil J.J.Gousanal |
| 215 | Robust Design of Smart Lawn Cutter for Gardening Companion | IOP Conference Series: Materials Science and Engineering | International | Vol.1012, No.1 p.012005, 2021 | A.Balaji E.R.Shanthini M.J.Rooshan V.Sivaram |
| 216 | Infobot: An Autonomous System for Offline Shopping | IOP Conference Series: Materials Science and Engineering | International | Vol.1055, No.1 p.012004, 2021 | A.Balaji R.Ragunathan R.R.Sai V.Nithya |
| 217 | Robust Design of Automatic Sheet Fixing System for Metal Roofing | IOP Conference Series: Materials Science and Engineering | International | Vol.1055, No.1 p.012009, 2021 | A.Balaji R.Rithic Sai J.Jason Gousanal J.Mithil |
| 218 | Detection of fire prone environment using Thermal Sensing Drone | IOP Conference Series: Materials Science and Engineering | International | Vol.1055, No.1 p.012006, 2021 | N.Nithyavathy S.Arun Kumar D.Rahul B.Satheesh Kumar E.R.Shanthini C.Naveen |
| 219 | Design, Fabrication, and Performance Analysis of Intelligent Mesoscale Capacitive Accelerometer for Vibration Measurement | Journal of Testing and Evaluation | International | Vol.49, No.4 pp.1–8, 2021 | K.Gomathi R.Sakthivel S.Joseph John Marshal V.G.Pratheep |
| 220 | Machine Vision based quality inspection for automotive parts using edge detection technique | IOP Conference Series: Materials Science and Engineering | International | Vol.1055, No.1, 2021 | R.Kiruba Shankar J.Indra R.Oviya A.Heeraj R.Ragunathan |
| 221 | Design and Development of Mobile AID for Muscular Dystrophy | IOP Conference Series: Materials Science and Engineering | International | Vol.1055, No.1 p.012046, 2021 | A.Tony Thomas K.V.Mahesh Kumar S.K.Thangarasu S.Naveen Saravanan |
| 222 | Design and fabrication of IOT switch with manual override | IOP Conference Series: Materials Science and Engineering | International | Vol.1055, No.1 p.012086, 2021 | S.Praveen Kumar D.Srihariharan K.M.Sai Harish Adithya R.Hemachander |
| 223 | Design And Fabrication Of Semi-Automated Facsimile Stamping Machine | IOP Conference Series: Materials Science and Engineering | International | Vol.1055, No.1 p.012085, 2021 | S.Praveen Kumar R.Hehma Gayatri S.Nathiya R.Hemachander |
| 224 | Design and Fabrication of a Multinomial Model for Machine Interference Problem | IOP Conference Series: Materials Science and Engineering | International | Vol.1055, No.1 p.012049, 2021 | D.V.Prabu B.Meenakshi Priya E.B.Priyanka G.Kalaiarassan |
| 225 | Application of Integrated IoT Framework to Water Pipeline Transportation System in Smart Cities | In: Peter J., Fernandes S., Alavi A. (eds) Intelligence in Big Data Technologies—Beyond the Hype. Advances in Intelligent Systems and Computing | International | Vol.1167, 2021 | E.B.Priyanka S.Thangavel V.Madhuvishal S.Tharun K.V.Raagul C.S.Shiv Krishnan |
| 226 | Review analysis on cloud computing based smart grid technology in the oil pipeline sensor network system | Petroleum Research | International | Vol.6, No.1 pp.77-90, 2021 | E.B.Priyanka S.Thangavel X.Z.Gao |
| 227 | Bus body manufacturing system via FEMA and fuzzy logic controller | Soft Computing | International | Vol.25, pp.3889–3901, 2021 | A.Muthukumar K.Krishnamurthy |
| 228 | Machine Learning based Mechanism for Crowd Mobilization and Control | 6th International Conference on Inventive Computation Technologies (ICICT), Coimbatore | International | pp.1334-1339, 2021 | K.Suganeswaran K.Dhileephan N.Nithyavathy P.Ganeshan S.Arunkumar A.J.Antony |
| 229 | Proliferative Diabetic Retinopathy Diagnostic Investigation Using Retinal Blood Vessels Mining Technique | Sensing and Imaging | International | Vol.22, No.10, 2021 | M.Ponnibala E.B.Priyanka S.Thangavel |
| 230 | Decision Making Based on Machine Learning Algorithm for Identifying Failure Rates in the Oil Transportation Pipeline | 2020 International Conference on Decision Aid Sciences and Application (DASA), Sakheer, Bahrain, 2020 IEEE Explore | International | pp.914-919, 2021 | E.B.Priyanka S.Thangavel |
| 231 | Semi-automatic cloth bag making machine | Materials today proceedings | International | Vol.33, pp.3454–3457, 2020 | S.Arunkumar K.Suganeswaran N.Nithyavathy V.K.Gobinath |
| 232 | Modeling and structural analysis of leaf spring using composite materials | Materials today proceedings | International | Vol.33, pp.4228-4232, 2020 | K.Krishnamurthy P.Ravichandran A.Shahid Naufal R.Pradeep K.M.Sai HarishAdithiya |
| 233 | Electrical and mechanical studies on pure-silver coated aluminium based electrical contact materials | Materials today proceedings | International | Vol.33, pp.3621-3625, 2020 | S.Praveen Kumar R.Parameshwaran S.Arun Kumar S.Nathiya K.Heenalisha |
| 234 | Process parameter optimization and performance comparison of AISI 430 and AISI 1018 in resistance spot welding process | Materials today proceedings | International | Vol.33, pp.3389-3393, 2020 | P.Ravichandran C.Anbu B.Meenakshipriya S.Sathiyavathi |
| 235 | Experimental and numerical analysis of impact strength of Al6082 for automotive structural applications | Materials today proceedings | International | Vol.33, pp.2863-2867, 2020 | K.Dineshkumar K.S.K.SasiKumar S.Shankar |
| 236 | Influence of Internet of Things (IoT) in Association of Data Mining Towards the Development Smart Cities-A Review Analysis | Journal of Engineering Science and Technology Review | International | Vol.13, No.4 pp.1 – 21, 2020 | E.B.Priyanka S.Thangavel |
| 237 | FEA of SAW penetration of Ramor 500 steel | Materials testing | International | Vol.62, No.12 pp.1192-1198 December 2020 | Ali Kaya Gur Semih Taskaya S.Shankar T.Mohanraj |
| 238 | Effect of Water Jet Pressure In Abrasive Water Jet Machining Process of Various Material – A Review | Journal of Gedrag & Organisatie Review | International | Vol.33, No.2 pp.2693-2707, 2020 | M.Ponni Bala C.Maheswari K.Janani S.Magima Shree S.Kalaianbumani M.Dharanidharan |
| 239 | Insights of covid-19 in INDIAN state of Kerala in initial phase | Journal of Critical Reviews | International | Vol.7, No.10 pp.2166-2172, 2020 | D.Dinesh Kumar C.N.Gnanaprakasam B.Meenakshipriya R.Elavarasan |
| 240 | Experimental investigations of vibration and acoustics signals in milling process using kapok oil as cutting fluid | Journal of Mechanics & Industry | International | Vol.21, No.521 pp.1-13, 2020 | S.Shankar M.Manikandan G.Raja A.Pramanik |
| 241 | Enhanced Digital Synthesized Phase Locked Loop with High Frequency Compensation and Clock Generation | Journal of Sensing and Imaging | International | Vol.21, Article ID:43 pp.1-12, 2020 | E.B.Priyanka S.Thangavel V.G.Pratheep |
| 242 | Multiple regression analysis for the prediction of extraction efficiency in mining industry with industrial IoT | Journal of Production Engineering | International | Vol.14, pp.457-471, 2020 | C.Maheswari E.B.Priyanka S.Thangavel S.R.Vignesh C.Poongodi |
| 243 | Contact Stress and Wear Analysis of Zirconia Against Alumina for Normal and Physically Demanding Loads in Hip Prosthesis. | Journal of Bionic Engineering | International | Vol.17, No.5 pp.1045–1058, 2020 | S.Shankar R.Nithyaprakash P.Sugunesh M.Uddin A.Pramanik |
| 244 | Corrosion behavioral studies on AA7075 surface hybrid composites tailored through friction stir processing | Anti-Corrosion Methods and Materials | International | Vol.67, No.4 pp.345-355, 2020 | S.Kandasamy P.Rathinasamy N.Nagarajan K.Arumugam R.Rathanasamy G.Velu Kaliyannan |
| 245 | Computer Control of Non Linear Spherical tank system using Firefly and Bat Algorithm | Journal of Solid State Technology | International | Vol.63, No.4 pp.2803-2813, 2020 | D.Dineshkumar B.Meenakshipriya |
| 246 | Fuzzy weighted geometric mean approach-based FMEA to prioritise lean failure modes in manufacturing industries | Journal of Manufacturing Technology and Management | International | Vol.33, No.6 pp.398–427, 2020 | M.Bhuvenesh Kumar R.Parameshwaran |
| 247 | Influence of Milling Parameters on Surface Roughness of Al–SiC–B4C Composites | Transactions on the Indian Institute of metals | International | Vol.73, pp.1171–1183, 2020 | M.Bhuvanesh Kumar R.Parameshwaran K.Deepandurai S.M.Senthil |
| 248 | A comprehensive model to prioritise lean tools for manufacturing industries: A fuzzy FMEA AHP and QFD-based approach | International Journal of Services and Operations Management | International | Vol.37, No.2 pp.170–196, 2020 | M.Bhuvenesh Kumar R.Parameshwaran |
| 249 | Long-term wear prediction of zirconia on alumina ceramic for hip prosthesis | Surface Science and Engineering | International | Vol.14, No.3 pp.192–206, 2020 | S.Shankar R.Nithyaprakash A.P.Sugunesh M.S.Uddin |
| 250 | Performance Evaluation of a Solar PV/T Water Heater Integrated with Inorganic Salt Based Energy Storage Medium | Journal of New Materials for Electrochemical Systems | International | Vol.23, No.3 pp.213-220, 2020 | R.Prakash B.Meenakshipriya S.Vijayan R.Kumaravelan |
| 251 | Experimental and submodeling technique to investigate the wear of silicon nitride against Ti6Al4V alloy with bio-lubricants for various gait activities | Tribology International | International | Vol.151, Article ID.106529 pp.1-10, 2020 | S.Shankar R.Nithyaprakash B.R.Santhosh Ali Kaya Gur Alokesh Pramanik |
| 252 | Design, development, calibration, and testing of indigenously developed strain gauge based dynamometer for cutting force measurement in the milling process | Journal of Mechanical Engineering and Sciences | International | Vol.14, No.2 pp.6594-6609, 2020 | T.Mohanraj S.Shankar R.Rajasekar M.S.Uddin |
| 253 | Substantial reduction of carbon black and balancing the technical properties of styrene butadiene rubber compounds using nanoclay | Journal of Rubber Research | International | Vol.23, pp.79–87, 2020 | M.K.Harikrishna kumar S.Shankar R.Rajasekar |
| 254 | Mecanum Wheeled Mobile Robot For Welding Process | International Journal of Mechanical and Production Engineering Research and Development | International | Vol.10, No.3 pp.563–572, 2020 | B.Meenakshipriya Anil Kumar Choudry S.Siva surya S.Suba shree A.Prenitha |
| 255 | Design and Development of Spherical Robot using Pendulum Mechanism | Journal of Gedrag & Organisatie Review | International | Vol.33, No.2 pp.2570- 2581, 2020 | K.Krishnamurthy B.Meenakshipriya K.Indhu Shree R.Vaishanth V.Sandeep V.Pramoth Vijay |
| 256 | Future prediction & estimation of faults occurrences in oil pipelines by using data clustering with time series forecasting | Journal of Loss Prevention in the Process Industries | International | Vol.66, Article ID.104203, 2020 | E.B.Priyanka C.Maheswari S.Thangavel |
| 257 | Finite element submodeling technique to analyze the contact pressure and wear of hard bearing couples in hip prosthesis | Computer Methods in Biomechanics and Biomedical Engineering | International | Vol.23, No.8 pp.422–443, 2020 | S.Shankar R.Nithyaprakash B.R.Santhosh M.S Uddin A. Pramanik |
| 258 | Prevalence of work related musculoskeletal disorders among occupational bus drivers of Karnataka, South India | Work | International | Vol.66, No.1 pp.73-84, 2020 | H.P.Kumar G.Sakthivel S.Shankar |
| 259 | Multiple regression analysis for the prediction of extraction efficiency in mining industry with industrial IoT | Journal of Production Engineering | International | Vol.14, pp.457-471, 2020 | C.Maheswari E.B.Priyanka S.Thangavel S.R.Vignesh C.Poongodi |
| 260 | Vibration signals based bearing defects identification through online monitoring using LABVIEW | Journal Européen des Systèmes Automatisés | International | Vol.53, No.2 pp.187-193, 2020 | C.Maheswari E.B.Priyanka I.A.Ibrahim Sherif S.Thangavel C.Poongodi |
| 261 | Optimization of CNC-WEDM Parameters for AA2024/ZrB2 in situ Stir Cast Composites Using Response Surface Methodology with Desirability Function Technique | Arabian Journal for Science and Engineering | International | Vol.45, pp. 5563–5579, 2020 | N.Muralidharan K.Chockalingam R.Parameshwaran R.Kalaiselvan N.Nithyavathy |
| 262 | Effect of Water Jet Pressure in Abrasive Water Jet Machining Process of Various Material – A Review | Journal of Gedrag & Organisatie Review | International | Vol.33, No.2 pp.2693-2707, 2020 | P.Ravichandran C.Anbu S.Sathiyavathi S.Senthilraja J.Maniraj |
| 263 | A smart – integrated IoT module for intelligent transportation in oil industry | International Journal of Numerical Modelling, Electronic Networks, Devices And Fields | International | Special Issue, March 2020 | E.B.Priyanka C.Maheswari S.Thangavel |
| 264 | IoT based household water usage monitoring and controlling | International Journal of Scientific & Technology Research | International | Vol.9, No.3 pp.5917-592 March 2020 | K.Gomathi C.HarishBaabu V.B.Jagasureya R.Mohamed Ashfaque |
| 265 | Burr formation and its treatments - A review | The International Journal of Advanced Manufacturing Technology | International | Vol.107, pp.2189–2210, 2020 | Song Yong Jin A.Pramanik A.K.Basak C.Prakash S.Shankar S.Debnath |
| 266 | Design and fabrication of in-wheel suspension in bicycle | International Journal of Advanced Science and Technology | International | Vol.29, No.9s pp.5318-5326 2020 | M.Gowri Shankar S.Ajay N.Prasanna T.Rajagopal |
| 267 | Mathematical model development for managing construction accidents using design expert | International Journal of Advanced Science and Technology | International | Vol.29, No.9s pp.5420-5425 2020 | K.Kavya T.Pradeep M.Gowrishankar |
| 268 | Assessment of constructability and financial aspects of risks in construction industry using design expert | International Journal of Advanced Science and Technology | International | Vol.29, No.9s pp.4329-4338 2020 | S.Keerthana T.Pradeep M.Gowri Shankar N.Prasanna |
| 269 | Design and fabrication of semi- automatic rapid wall making machine | International Journal of Scientific & Technology Research | International | Vol.9, No.3 March 2020 | C.Naveen S.Venkatachalam V.Mohanap priyan U.S.Naveenrajan S.Kishore |
| 270 | Design and Development of 3d Printer Filament Extruder for Material Reuse | International Journal of Scientific & Technology Research | International | Vol.9, No.1 pp.3771-3775 2020 | P.Ravichandran C.Anbu R.Poornachandran M.Shenbagarajan K.S.Yaswahnthan |
| 271 | Design and Development of Drone for Healthcare | International Journal of Scientific & Technology Research | International | Vol.9, No.1 pp.2676-2680 2020 | N.Nithyavathy S.Pavithra M.Naveen B.Logesh T.James |
| 272 | Physiotherapy Robotic Arm | International Journal of Scientific & Technology Research | International | Vol.9, No.1 pp.3988-3991 2020 | N.Muralidharan C.Maheswari S.V.Kumar B.Lokesh T.Manivannan |
| 273 | Tool wear prediction in hard turning of EN8 steel using cutting force and surface roughness with artificial neural network | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | International | Vol.234, No.1 pp.329-342 2020 | S.K.Thangarasu S.Shankar T.Moharnraj K.Devendran |
| 274 | Tool condition monitoring techniques in milling process - A review | Journal of Materials Research and Technology | International | Vol.9, No.1 pp.1032-1042 2020 | T.Mohanraj S.Shankar R.Rajasekar N.R.Sakthivel A.Pramanik |
| 275 | Integrating IoT with LQR-PID controller for online surveillance and control of flow and pressure in fluid transportation system | Journal of Industrial Information Integration | International | Vol.7 pp.1-15 2020 | E.B.Priyanka C.Maheswari S.Thangavel M.Ponni Bala |
| 276 | Process parameter optimization for magnetic abrasive finishing of SS310s steel | Material Testing | International | Vol.62, No.2 pp.157-164 2020 | K.Suganeswaran R.Parameshwaran T.Mohanraj B.Meenakshipriya |
| 277 | A Study and Development of Semi-Automatic Bobbin and Shielding Machine for Textile Industry | International Journal of Scientific & Technology Research | International | Vol.9, No.1 pp.3113-3116 2020 | R.KirubaShankar M.Sudharsan T.N.Suren P.Tamilarsan |
| 278 | Design And Fabrication of Sprig Cassava Chopping Machine for Farmers | International Journal of Scientific & Technology Research | International | Vol.9, No.2 pp.4984-4986 2020 | R.Kiruba Shankar M.G.Ramjee M.Saran S.Sasivengat |
| 279 | Design and Development of 3D Printer Filament Extruder for Material Reuse | International Journal of Scientific & Technology Research | International | Vol.9, No.1 pp.3771-3775 2020 | P.Ravichandran C.Anbu R.Poornachandran M.Shenbagarajan K.S.Yaswahnthan |
| 280 | Design and Development of Drone for Healthcare | International Journal of Scientific & Technology Research | International | Vol.9, No.1 pp.2676-2680 2020 | N.Nithyavathy S.Pavithra M.Naveen B.Logesh T.James |
| 281 | Physiotherapy Robotic Arm | International Journal of Scientific & Technology Research | International | Vol.9, No.1 pp.3988-3991 2020 | N.Muralidharan C.Maheswari S.V.Kumar B.Lokesh T.Manivannan |
| 282 | Tool wear prediction in hard turning of EN8 steel using cutting force and surface roughness with artificial neural network | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | International | Vol.234, No.1 pp.329-342 2020 | S.K.Thangarasu S.Shankar T.Moharnraj K.Devendran |
| 283 | Tool condition monitoring techniques in milling process-a review | Journal of Materials Research and Technology | International | Vol.9, No.1 pp.1032-1042 2020 | T.Mohanraj S.Shankar R.Rajasekar N.R.Sakthivel A.Pramanik |
| 284 | Experimental investigation on the influence of carbon-based nanoparticle coating on the heat transfer characteristics of the microprocessor | Journal of Composite Materials | International | Vol.54, No.1 pp.61-70 2019 | T.Tamilarasi R.Rajasekar K.Saminathan K.Ravichandran T.Mohanraj C.Moganapriya V.K.Gobinath |
| 285 | Tool condition monitoring while using vegetable based cutting fluids during milling of INCONEL 625 | Journal of Advanced Manufacturing Systems | International | Vol.18, No.4 pp.563 -581 2019 | S.Shankar T.Mohanraj A.Pramanik |
| 286 | Experimental study of surface roughness and taper angle in abrasive water jet machining of 7075 Aluminium composite using Response Surface Methodology | Surface Review and Letters | International | 10.1142/S0218625 X19501129 2019 | A.Shanmugam K.Krishnamurthy T.Mohanraj |
| 287 | Characterization and Analysis of Natural Fibre-Rice Husk with Wood Plastic Composites | IOP conference series, material science Engineering | International | Vol.561 pp.1-10 November 2019 | V.G.Pratheep E.B.Priyanka P Hare Prasad |
| 288 | Design and Development of Z-Robot for industrial Applications | International Journal of Innovative Technology and Exploring Engineering | International | Vol.9, No.1 pp.1984-1989 November 2019 | J.Indra R.Kiruba Shankar N.Ilakkiya S.Indujha S.Guhan |
| 289 | Influence of graphene oxide on the static and dynamic mechanical behavior of compatibilized polypropylene nanocomposites | Materials Testing | International | Vol.61, No.10 pp.986-990 October 2019 | K.V.Maheshkumar K.Krishnamurthy R.Rajasekar P.Sathishkumar Ganesh Chandra Nayak |
| 290 | Design and Fabrication of 3 Axis Welding Robot | International Journal of Innovative Technology and Exploring Engineering | International | Vol.8, No.11 pp.1588-1592 September 2019 | V.G.Pratheep E.B.Priyanka R.Raja |
| 291 | Automated Pay and Use Browsing and Printing Machine | International Journal of Innovative Technology and Exploring Engineering | International | Vol.8, No.11S pp.148-152 September 2019 | P.Parameswari S.Thangavel E.B.Priyanka |
| 292 | Collision Warning System using RFID in Automotives | International Journal of Innovative Technology and Exploring Engineering | International | Vol.8,No.11S pp. 153-158 September 2019 | P.Parameswari E.B.Priyanka S.Thangavel |
| 293 | Fault Identification by Extreme Pressure in Oil Pipelines using Artificial Neural Network | Journal of Engineering and Advanced Technology | International | Vol.8, No.6 pp.90-96 August 2019 | E.B.Priyanka S.Thangavel P.Parameswari S.Ravi Sankar N.Selva Kumar R.Vignesh |
| 294 | Effects of thrust force variation during the drilling of pure and chemically treated kevlar based polymer composites | Journal of Materials and testing | International | Vol.61, No.9 pp.907-913 August 2019 | A.Mohan Kumar R.Parameshwaran V.Krishnaraj R.Rajasekar |
| 295 | Experimental study and Optimization in turning Process of EN8 steel using RSM with Hybrid Algorithm Approachq | International Journal of Bio-Inspired Computation | International | Vol.13, No.4 pp.242-256 2019 | S.K.Thangarasu S.Shankar R.Navin Prasath |
| 296 | Investigations on tribo-mechanical behaviour of Al-Si10-Mg/sugarcane bagasse ash/SiC hybrid composites | China Foundry | International | Vol.16, No.4 pp.405-412 2019 | S.Shankar A.Balaji N.Kawin Alokesh Pramanik |
| 297 | Removal of NOx from diesel engine exhaust by using different chemical absorbent in a lab-scale packed column system | Measurement and Control | International | Vol.52, Vol.7-8 pp.1095–1101 2019 | V.Arunkumar K.Krishnamurthy C.Maheswari B.Meenakshipriya R.Vinoth |
| 298 | .Optimization of turning parameters for AlSi10Mg/SCBA/SiC hybrid metal matrix composite using response surface methodology | Materials Research Express | International | Vol.6, No.10 2019 | S.Shankar A.Balaji A.Pramanik |
| 299 | Increasing Wear Resistant Of Electrical Contacts By Protective Coating | National Journal of Technology | National | Vol.15, No.2 pp.13-20 June 2019 | V.G.Pradeep E.B.Priyanka P.Hareprasad S.Thangavel |
| 300 | Tool condition monitoring in the milling process with vegetable based cutting fluids using vibration signatures | Materials Testing | International | Vol.61, No.3 pp.282-288 2019 | T.Mohanraj S.Shankar R.Rajasekar R.Deivasigamani M.Arunkumar |
| 301 | Study of the effect of varying shapes of holes in energy absorption characteristics on aluminium circular windowed tubes under quasi-static loading | Structural Engineering and Mechanics | International | Vol.70, No.2 pp.153-168 2019 | N.Baaskaran K.Ponappa S.Shankar |
| 302 | Burr formation during drilling of mild steel at different machining conditions | Materials and Manufacturing Processes | International | Vol.34, No.7 pp.726-735 2019 | A.Pramanik AK.Basak MS.Uddin S.Shankar S.Debnath MN.Islam |
| 303 | Material subtraction study of AISI T-15-HSS by wire cut electrical discharge machining (CNC-wire cut EDM) based on Taguchi grey relational analysis | International Journal of Machining and Machinability of Materials | International | Vol.21, No.3 pp.139-168 2019 | K.Chockalingam N.Jawahar N.Muralidharan K.L.Jeyaraj |
| 304 | A Study of Flotation Control | International Journal of Innovative Technology and Exploring Engineering | International | Vol.8, No.5 pp.435- 439 2019 | R.Kiruba Shankar T. Maris Murugan |
| 305 | Performance analysis and quality improvement using fuzzy MCDM and lean tools in a paper industry | International Journal of Integrated Supply Management | International | Vol.12, No.3 pp.205-229 2019 | N.Senthilkannan R.Parameshwaran |
| 306 | Digital hydraulic single-link trajectory tracking control through flow-based control | Journal of Measurement and Control | Vol.52, No.7-8 pp.775-787 May 2019 | G.Kalaiarassan K.Krishnamurthy | |
| 307 | Utilization of 2D gahnite nanosheets as highly conductive, transparent and light trapping front contact for silicon solar cells | Applied Nanoscience | International | Vol.9, No.7 pp.1427-1437 January 2019 | V.Gobinath P.SenthilVelmurugan P.Manivasakan C.Moganapriya S.Sankaranarayanan N.Nithyavathy R.Rajasekar |
| 308 | Influence of High Voltage on Heat Transfer Performance in Automobile Radiators | International Journal of Innovative Technology and Exploring Engineering | International | Vol.8, No.2S2 pp. 111-114 2018 | S.K.Dhinesh R.Parameshwaran S.Praveenkumar |
| 309 | Synthesis and characterization of Zinc Ferrite Nanoparticles for solar cell applications | International Journal for Trends in Engineering and Technology | International | Vol.35, No.1 pp.99-102 2019 | S.Arunkumar N.Nithyavathy Aswin V P Ram Harish Raj K.Thirunidhi Chelvan |
| 310 | Design and Performance analysis of Multilayer Coating of Sno2 doped Tio2 Coated Photovoltaic solar cells. | International Journal for Trends in Engineering and Technology | International | Vol.36, No.1 pp.46-48 2019 | S.Arun kumar P.Ajithkumar B.Aneesh E.Balaji N.Nithyavathy |
| 311 | Optimization of process parameters for AA7075 surface hybrid composites | International Journal for Trends in Engineering and Technology | International | Vol.36, No.1 pp.59-66 2019 | K.Suganeswaran N.Nithyavathy K.Indhu Shree A.Sarath Prakash R.Suirajkumar |
| 312 | An enhancement of EAACK using P2P ACK and RSA public key cryptography | Measurement | International | Vol.136 pp.116-121 2019 | R.Thiyagarajan B.Meenakshipriya |
| 313 | Prediction of cutting tool wear during milling process using artificial intelligence techniques | International Journal of Computer Integrated Manufacturing | International | Vol.32, No.2 pp.174-182 2019 | S.Shankar T.Mohanraj R.Rajasekar |
| 314 | Management of Musculoskeletal Shoulder and Neck Pain through Ergonomic Intervention: A Pre-Post Design analysis in Hand Screen Printing Industry | International Journal of Business Innovation and Research | International | Vol.18, No.3 pp.392-409 2019 | S.Shankar R.Naveenkumar J.Karthick |
| 315 | Influence of Graphene coating on altering the heat transfer behavior of microprocessors | Materials testing | International | Vol.61, No.2 pp.169-172 2019 | T.Tamilarasi R.Rajasekar K.Saminathan P.Gukan |
| 316 | Development of unmanned guided vehicle for material handling automation for industry 4.0 | International Journal of Recent Technology and Engineering | International | Vol.7, No.4 pp.428-432 2019 | C.Maheswari E.B.Priyanka R.Parameswaran S.Thangavel |
| 317 | Mechanical loading characteristics of total hip prosthetics subjected to dynamic loading cycles | Bio-Medical Materials and Engineering | International | Vol.29, No.6 pp.723-737 2018 | M.Kalayarasan S.Shankar M.Manikandan K.Adithan |
| 318 | Low back pain assessment using Surface Electromyography among industry workers during the repetitive bending tasks | International Journal of Human Factors and Ergonomics | International | Vol.5, No.4 pp.277-292 2018 | S.Shankar R.Naveenkumar S.Pradeep J.Karthick J.Srinivasan |
| 319 | PSO tuning of a CDM based PID controller for ball and beam system | International Journal of pure and Applied Mathematics | International | Vol.120, No.6 pp.10905-10927 2018 | B.Meenakshipriya C.Naveen K.Kalpana |
| 320 | Design and development of automatic loading and unloading of moulding box in heat moulding machine | IOP Conference Series: Materials Science and Engineering | International | Vol.402, No.1 pp.1-6 2018 | K.Sethuramalingam P.Aravind V.Arun Kumar A.Tony Thomas |
| 321 | Assessment of dynamic crushing and energy absorption characteristics of thin-walled cylinders due to axial and oblique impact load | Steel and Composite Structures | International | Vol.28, No.2 pp.179-194 2018 | N.Baaskaran K.Ponappa S.Shankar |
| 322 | An experimental study on the effect of nano-clay addition on mechanical and water absorption behaviour of jute fibre reinforced epoxy composites | Journal of Industrial Textiles | International | Vol.49, No.5 pp.597-620 August 2018 | S.Ramakrishnan K.Krishnamurthy R.Rajasekar G.Rajeshkumar |
| 323 | Online Monitoring and Control of Flow rate in Oil Pipelines Transportation System by using PLC based Fuzzy?PID Controller | Flow Measurement and Instrumentation | International | Vol.62, pp.144-151 2018 | E.B.Priyanka C.Maheswari S.Thangavel |
| 324 | Integrated approach for product optimisation in a rolling mill using fuzzy MCDM tools | International Journal of Additive and Subtractive Materials Manufacturing | International | Vol.2, No.1 pp.25-44 2018 | N.Senthilkannan R.Parameshwaran |
| 325 | Fuzzy Logic Forge Filter Weave Pattern Recognition Analysis on Fabric Texture | International Journal of Electrical and Electronic Science | International | Vol.5, No.3 pp.69-76 May 2018 | E.B.Priyanka S.Thangavel |
| 326 | Design and Development of Automatic Rotten Egg Separator-Image Processing Algorithm | International Journal of Engineering Trends and Technology | International | Vol.59, No.2 pp.113-116 May 2018 | K.Sethu Ramalingam K.R. Vishal V.Arun Kumar |
| 327 | Computational Wear Assessment of Hard on Hard Hip Implants Subject to Physically Demanding Tasks | Medical & Biological Engineering & Computing | International | Vol.56, No.5 pp.899-910 May 2018 | R.Nithyaprakash S.Shankar MS.Uddin |
| 328 | Advanced enhancement model of bionics fish cilia MEMS vector hydrophone-systematic analysis review | MOJ- Applied Bionics and Biomechanics | International | Vol.2, No.2 pp.121-125 March 2018 | E.B.Priyanka S.Thangavel |
| 329 | Investigations on Mechanical and Tribological Properties of Al-Si10-Mg alloy / Sugarcane Bagasse Ash Particulate Composites | Particulate Science and Technology | International | Vol.36, No.6 pp.762-770, 2018 | S.Shankar A.Balaji N.Kawin |
| 330 | Design and Development of Hydraulic Driven Mobile Air Inflator | International Journal for Modern Trends in Science and Technology | International | Vol.4, No.5 pp.8-12 2018 | V.Arun Kumar K.Sethu Ramalingam |
| 331 | Development and Control of a Sitting Type Lower Limb Rehabilitation Mechanism based on 1P-2PRP Planar Hybrid Manipulator | Journal of Computers and Electrical Engineering | International | Vol.67 pp.330-347 2018 | J.K.Mohanta M.Santhakumar P.Deepasundar R.Kiruba Shankar |
| 332 | Evaluation of Tribological Properties on Ceiba Pentandra (Kapok) Seed Oil as an Alternative Lubricant | Industrial Lubrication and Tribology | International | Vol.70, No.3 pp.506-511 February 2018 | S.Shankar M.Manikandan G.Raja |
| 333 | A Workbench for Motion Control Experiments using Programmable Automation Controllers in Industrial Automation Laboratory at Kongu Engineering College | Journal of Computer Applications for Engineering Education | International | Vol.26, No.3 pp.566-576 February 2018 | C.Jegadheesan R.Kiruba Shankar C.Maheswari R.Parameshwaran |
| 334 | Fuzzy integrated QFD, FMEA framework for the selection of lean tools in a manufacturing organisation | Production Planning & Control | International | Vol.29, No.5 pp.403-417 February 2018 | M.Bhuvanesh Kumar R.Parameshwaran |
| 335 | Microstructure and mechanical behavior of AA2024 aluminum matrix composites reinforced with in situ synthesized ZrB2 particles | Journal of Alloys and Compounds | International | Vol.735, No.6 pp.2167-2174 February 2018 | N.Muralidharan K.Chockalingam I.Dinaharan K.Kalaiselvan |
| 336 | Wear prediction of hard carbon coated hard-on-hard hip implants using finite element method | International Journal of Computer Aided Engineering and Technology | International | Vol.10, No.4 pp.440-456 January 2018 | S.Shankar R.Siddarth R.Nithyaprakash MS.Uddin |
| 337 | Assessment of shoulder and low back muscle activity of kitchen workers using surface electromyography | International Journal of Occupational Medicine and Environmental Health | International | Vol.31, No.1 pp.81-90, 2018 | S.Shankar P.Shanmugam J.Srinivasan |
| 338 | Milling of Nanoparticles Reinforced Al-Based Metal Matrix Composites | Journal of Composite Sciences | International | Vol.2, No.1 pp.1-12, 2018 | Alokesh Pramanik Animesh Kumar Basak Yu Dong S.Shankar Guy Littlefair |
| 339 | Evaluation of vibrant muscles over shoulder region among the workers of Hand Screen Printing Industry | International Journal of Occupational Safety and Ergonomics | International | Vol.28, No.2 pp.278-285, 2018 | S.Shankar R.Naveenkumar J.Karthick P.Mohankumar |
| 340 | Frictional characteristics of diamond like carbon and tungsten carbide/carbon coated high carbon high chromium steel against carbon in dry sliding conformal contact for mechanical seals | Mechanics & Industry | International | Vol.18, No.1 pp.1-7, 2017 | S.Shankar P.Krishnakumar |
| 341 | Influence of vegetable based cutting fluids on cutting force and vibration signature during milling of aluminium metal matrix composites | Jurnal Tribologi | International | Vol.12, No.1 pp.1-17, 2017 | S.Shankar T.Mohanraj K.Ponappa |
| 342 | Influence of Surface Texture Shape, Geometry and Orientation on Hydrodynamic Lubrication Performance of Plane-to-Plane Slider Surfaces | Lubrication Science | International | Vol.29, No.3 pp.153-181, 2017 | MS Uddin Tom Ibatan S.Shankar |
| 343 | Dry sliding wear behaviour of Palmyra shell ash reinforced aluminium matrix (AlSi10Mg) composites | Tribology Transactions | International | Vol.60, No.3 pp.469-478, 2017 | S.Shankar R.Elango |
| 344 | Combined Effect of Cup Abduction and Anteversion Angles on Long-Term Wear Evolution of PCD-on-PCD Hip Bearing Couple | International Journal of Biomedical Engineering and Technology | International | Vol.24, No.2 pp.169-183, 2017 | S.Shankar K.Gowthaman M. S.Uddin |
| 345 | Experimental Investigation and Process Parameter Optimization in Milling of 7075 – T6 Hybrid Aluminium Metal Matrix Composite using Response Surface Methodology | Journal of the Balkan Tribological Association | International | Vol.23, No.1 pp.124-138, 2017 | S.Shankar T.Mohanraj |
| 346 | A New Star Like Surface Texture Shape for Enhanced Hydrodynamic Lubrication Performance | Archives of Metallurgy and Materials | International | Vol.62, No.3 pp.1861-1867, 2017 | M.S.Uddin YiWei Liu S.Shankar |
| 347 | Quasi-Static Crushing and Energy Absorption Characteristics of Thin-Walled Cylinders with Geometric Discontinuities of Various Aspect Ratios | Latin American Journal of Solids and Structures | International | Vol.14, No.9 pp.1767-1787, 2017 | N.Baaskaran K.Ponappa S.Shankar |
| 348 | Prevalence of work-related musculoskeletal injuries among South Indian hand screen-printing workers | Work: A Journal of Prevention, Assessment & Rehabilitation | International | Vol.58, No.2 pp.163-172, 2017 | S.Shankar R.Naveenkumar P.Mohankumar J.Srinivasan |
| 349 | Partial replacement of carbon black by nanoclay in butyl rubber compounds for tubeless tires | Materials Testing | International | Vol.59, No.12 pp.1054-1060, 2017 | M.Harikrishna Kumar S.Shankar R.Rajasekar SK Pal P.Sathishkumar |
| 350 | Experimental and numerical investigation on plasma sprayed ceramic coatings for different coating thickness | International Journal of Computational Materials Science and Surface Engineering | International | Vol.7, No.1 pp.26-43, 2017 | M.Kalayarasan V.Prabhu Raja S.Shankar V.Nithin V.Karthik |
| 351 | Design of GSPI and Neural Controller for Boiler Drum Level Control | Interciencia Journal | International | Vol.42, No.10 pp.215-223 2017 | D.Dinesh Kumar B.Meenakshipriya |
| 352 | Investigation effect of hydrogen addition on the performance and exhaust emissions of Pongamia pinnata biodiesel fueled compression ignition engine | International Journal of Green Energy | International | Vol.14, No.15 pp.1256-1268 2017 | C.Jegadheesan P.Somasundaram B.Meenakshipriya U. P.Vignesh |
| 353 | Parameter Characterization in Processing of Silver–Aluminum Based Electrical Contact Materials | Archives of Metallurgy and Materials | International | Vol.62, No.3 pp.1895-1901 2017 | S.Praveen Kumar R.Parameshwaran A.Ananthi J.Jenil Jaba Sam |
| 354 | Characterization of Case Hardened AISI 4130 Steel Using Eddy Current Testing | Archives of Metallurgy and Materials | International | Vol.62, No.3 pp.1833-1837 2017 | R.Gukendran R.Parameshwaran K.Ponappa |
| 355 | Gas sensing behavior of cerium oxide and magnesium aluminate composites | Bulletin of Materials Science | International | Vol.40, No.4 pp.667-682 August 2017 | N.Nithyavathy V.Rajendran L.John Berchmans M.Maaza S.Krithika |
| 356 | Fractional-order PID controller tuned by coefficient diagram method and particle swarm optimization algorithms for SO2 emission control process | Institution of Mechanical Engineers, Part 1, Journal of systems and control engineering | International | Vol.231, No.8 pp.587-599 2017 | C.Maheswari B.Meenakshipriya E.B.Priyanka |
| 357 | Analysis of Hydraulics Actuator Speed Control using Digital Hydraulics | Mechanical Engineering and Technology | International | Vol.8, No.7 pp.213-224 July 2017 | G.Kalaiarasan Giriraj Mannayee M.Boopathi Somanadh Mayakoti K.Krishnamurthy |
| 358 | Effects of abaca fiber reinforcement on the dynamic mechanical behavior of vinyl ester composites | Materials Testing | International | Vol.59, No.6 pp.555-562 May 2017 | A.Mohan Kumar R.Parameshwaran P.Sathish Kumar S.K.Pal M.M.Prasath V.Krishnaraj R.Rajasekar |
| 359 | Performance and Emission Analysis on Diesel Engine using Blended Cotton Seed Oil with Natural Additives | Journal of Chemical and Pharmaceutical Sciences | International | Special Issue No.7 pp.48-52 May 2017 | A.Balaji D.Arun R.Karthikeyan A.Amaresh |
| 360 | Investigation of Surface Texture Generated by Friction Drilling on Al2024-T6 | Mechanics, Materials Science & Engineering | International | Vol.9, No.2 pp.291-295 April 2017 | M.Boopathi S.Shankar T.Kanish |
| 361 | An efficient photo anode for dye sensitized solar cells using naturally derived S/TiO2 nanoparticles | Materials Research Express | International | Vol. 4, No.3 March 2017 | S.Arunmetha V.Rajendran N.Nithyavathy M.Vinoth A.Karthik S.R.Srither M Srither Panday P.Manivasakan |
| 362 | Automatic Traffic rules abiding control | International Journal of Students Research in Technology and Management | International | Vol.5, No.1 March 2017 | S.Karthikeyan S.Hemanth S.Karthik N.Nithyavathy |
| 363 | Retrofitting process optimization in CNC machines using PLC and labview | International Journal of Engineering Development and Research | International | Vol.5, No.1 pp.621-625 March 2017 | A.Balaji H.Jahir Hussain M.R.Faheem Ashkar |
| 364 | Inventive creation of arduino programmed gear cutting in drilling machine | International Journal for Research Trends and Innovation | International | Vol.2, No.3 pp.30-41 March 2017 | A.Balaji Manoj Prabhakar Indradev |
| 365 | Synthesis and Characterisation of Nanocomposites of TiO2 and MgAl2O4 for Gas Sensing Applications | Journal of Nanoscience and Nanotechnology, | International | Vol.17, No.2 pp.1307-1320 February 2017 | N.Nithyavathy S.Arunmetha N.R.Dhineshbabu V.Rajendran M.Sridhar M.Srither Panday |
| 366 | Dual Reinforcement Effect of Nanoclay and Jute Fiber on the Mechanical Properties of Polyester Resin | Asian Journal of Research in Social Sciences and Humanities | International | Vol.6, No.12 pp.912-926 December 2016 | S.Ramakrishnan K.Krishnamurthy R.Rajasekar |
| 367 | Frictional characteristics of PVD coated mechanical seals against carbon under various classes of liquid lubricants | Industrial Lubrication and Tribology | International | Vol.68, No.5 pp.597-602 2016 | S.Shankar P.Krishna Kumar |
| 368 | Predicting Long-Term Wear Performance of Hard-on-Hard Bearing Couples - Effect of Cup Orientation | Medical & Biological Engineering & Computing | International | Vol.54, No.10 pp.1541-1552 2016 | S.Shankar K.Gowthaman M.S.Uddin |
| 369 | Investigations on Various Thread Designs & Materials for Dental Implants – A 3D Finite Element Study | Trends in Biomaterials and Artificial Organs | International | Vol.30, No.2 pp.1541-1552 2016 | S.Shankar K.Gowthaman G.Raja C.Nirmala N.Satheesh Kumar |
| 370 | Sitting Posture Health Monitoring For Scoliosis Patients Using Capacitive Micro Accelerometer | Nanosystems: Physics, Chemistry, Mathematics | International | Vol.7, No.3 pp.538-541 2016 | K.Gomathi A.Senthilkumar P.Naveen S.Thangavel |
| 371 | A Comparison of Genetic Algorithm and Particle Swarm Optimisation to Minimize the Makespan for Parallel Line Job Shop Scheduling | Research Journal of Applied Sciences, Engineering and Technology | International | Vol.13, No.5 pp.409-415 2016 | P.Ravichandran K.Krishnamurthy B. Meenakshipriya |
| 372 | Study of Citation Networks in Tribology Research | Journal of Scientometrics and Information Management | International | Vol.10 , No.1 pp.71-96 2016 | B.Elango L.Bornmann S.Shankar |
| 373 | Effect of Pretreatment Methods on Properties of Natural Fiber Composites. A Review | Polymers & Polymer Composites | International | Vol.24 No.7 pp.555-566 2016 | N.Venkatachalam P.Navaneethakrishnan R.Rajsekar S.Shankar |
| 374 | Online vibration suppression in lathe machine | Journal of achievements in materials and manufacturing engineering | International | Vol.77, No.2 pp.69-74 August 2016 | M.Asfar P.Naveenkumar V.Naveenkumar K.Krishnamurthy |
| 375 | Study of structural and optical properties of cupric oxide | Applied Nanoscience | International | Vol.6, No.1 pp.933-939 August 2016 | N.R.Dhineshbabu V.Rajendran N.Nithyavathy R.Vetumperumal |
| 376 | Simulation based sensitivity study of thread pattern and materials on cooling efficiency on M1 vehicle tyres | International Journal of Vehicle structures and systems | International | Vol.6, pp.234-240 July 2016 | K.Suganeswaran N.Nithyavathy R.Parameshwaran C.Naveen G.Raja |
| 377 | A Hybrid PSO-CS Algorithm for Parallel Line Job Shop Scheduling To Minimize Makespan | World Applied Sciences Journal | International | Vol.34, No.7 pp.878-883 July 2016 | P.Ravichandran K.Krishnamurthy R.Parameshwaran |
| 378 | Ultrasound Imaging Technique for the Identification of Kidney Stones using GSD Platformz | International Journal of Data Mining Techniques and Applications | International | Vol.5, No.1 pp.87-90 June 2016 | N.Nithyavathy Basil.M.Kuriakose S.Arunkumar P.Deepasundar S.Amirthamani |
| 379 | Designing of PID Controllers for pH Neutralization Process | Indian Journal of Science and Technology | International | Vol.9, No.12 2016 | S.Sakthiya Ram D.Dinesh Kumar B.Meenakshipriya |
| 380 | Design of PSO based I-PD Controller and PID Controller for a Spherical Tank System | Indian Journal of Science and Technology | International | Vol.9, No.12 2016 | D.Dinesh Kumar B.Meenakshipriya S.Sakthiya Ram |
| 381 | Design of Heuristic Algorithm for Non-linear System | Rev. Téc. Ing. Univ. Zulia | International | Vol.39, No.6 pp.10 -15 2016 | D.Dinesh Kumar B.Meenakshipriya |
| 382 | Design and comparison of PID and PSO based I-PD controller for ball and beam system | Spreizen International Journal on Science and Technology | International | Vol.1, No.1 pp.36-41 2016 | D.Dinesh Kumar B.Meenakshipriya S.Sakthiya Ram |
| 383 | Multi-response milling process optimization using the Taguchi method coupled to grey relational analysis | Materials Testing | International | Vol.58, No.5 pp.462-470 May 2016 | S.Shankar T.Mohanraj S.K.Thangarasu |
| 384 | Simulation of Obstacle Avoidance for Mobile Robots using Vector Field Histogram in Player/Stage Platform | International Journal of Engineering Research & Technology | International | Vol.4, No.19 pp.5-9 May 2016 | T.Mohanraj S.Prasanth G.Kalaiarasan |
| 385 | Predicting the Wear of Soft On Hard Bearing Couples for Human Hip Prosthesis using Finite Element Concepts | Journal of Mechanics in Medicine and Biology | International | Vol.16, No.3 pp.1-17 May 2016 | S.Shankar R.NithyaPrakash |
| 386 | Wear Prediction of The Lumbar Total Disc Replacement using Finite Element Method | Journal of Mechanics in Medicine and Biology | International | Vol.16, No.2 pp.1-12 May 2016 | S.Shankar D.Kesavan |
| 387 | Multiresponse Optimization of FSW Parameters for Cast AA7075/SiCp Composite | Materials and Manufacturing Processes | International | Vol.31, No.10 pp.1333-1341 May 2016 | K.Deepandurai R.Parameshwaran |
| 388 | Design and fabrication of remote controlled sewage cleaning machine | International Journal of Engineering Trends and Technology | International | Vol.45, No.2 pp.63-65 March 2016 | M.Mohamed Idhris M.Elamparthi C.Manoj Kumar N.Nithyavathy K.Suganeswaran S.Arunkumar |
| 389 | Parameter monitoring and control during petrol transportation using PLC based PID controller | Journal of Applied Research and Technology | International | Vol.14, No.2 pp.125–131 2016 | E.B.Priyanka C.Maheswari B.Meenakshipriya |
| 390 | Fabrication of Nanocomposites of SnO2 and MgAl2O4 for Gas Sensing Applications | Journal of Electronic Materials–Springer | International | Vol.45, No.4 pp.2193–2205 April 2016 | N.Nithyavathy S.Arunmetha M.Vinoth G.Sriram V.Rajendran |
| 391 | Performance Analysis of Capacitive micro accelerometer | International Journal of Applied Engineering Research | International | Vol.10, No.93 pp.307-312 March 2016 | K.Gomathi P.Naveen A.Senthilkumar |
| 392 | Review paper on simultaneous reduction techniques of SO2 and NOX for industrial boilers | International Journal of Applied Engineering Research | International | Vol.10, No.93 pp.283-287 2016 | C.Maheswari R.Vinoth B.Meenakshipriya V.Arun Kumar |
| 393 | Design and Development of Pipeline Cleaning Robot | International Journal of Engineering Research | International | Vol.5, No.4 pp.315-317 March 2016 | T.Tamilarasi S.Varun M.Saravana Kumar S.Sivaprakash |
| 394 | Design and Modeling of an Electrohydraulic Servo System for Hydraulic Presses | International Journal of Applied Engineering Research | International | Vol.10, No.93 pp.318-322 March 2016 | D.Venkatesa Prabhu A.Tony Thomas R.Parameshwaran |
| 395 | An Investigation on the modelling and controller design of a Hydraulic press | IFAC Proceedings | International | Vol.47, No.1 pp.719-725 2016 | A.Tony Thomas R.Parameshwaran R.Deepak Kumar S.Mohan Raja M.Harishwaran |
| 396 | Experimental study on frictional characteristics of tungsten carbide versus carbon as mechanical seals under dry and eco-friendly lubrications | International Journal of Refractory Metals and Hard Materials | International | Vol. 54, pp.39-45 2016 | S.Shankar G.Praveenkumar P.Krishna Kumar |
| 397 | Sensitivity and Response of Polyvinyl Alcohol/Tin Oxide Nanocomposite Multilayer Thin Film Sensors | Journal of Nanoscience and Nanotechnology | International | Vol.16, No.1 pp.1008-1017, 2016 | G.Sriram N.R.Dhineshbabu N.Nithyavathy K.Saminathan K.V.I.S.Kaler V.Rajendran |
| 398 | Improvement of Case Hardening Depth in Camshaft Based on Process Parameters Optimization by Response Surface Methodology (RSM) | International Journal of Applied Engineering Research | International | Vol.10, No.93 pp.293-297 2015 | N.Muralidharan A.Shanmugasundaram T.Malarkodi B.Ponmani C.Swathi Vevekanantham R.Ragaventhiran |
| 399 | Review paper on simultaneous reduction techniques of SO2 and NOx gases from industrial boilers | International Journal of Control Theory and Applications | International | Vol.10, No.93 pp.283-287 2015 | C.Maheswari R.Vinoth B.Meenakshipriya V.Arunkumar |
| 400 | Stabilization of Single Stage Inverted Pendulum using Multi-loop PID Controller | International Journal of Control Theory and Applications | International | Vol.10, No.93 pp.289-292 2015 | B.Meenakshipriya C.Naveen M.Prakash C.Maheswari |
| 401 | Design and Comparison of Intelligent Controllers for a Boiler Drum Level System | International Journal of Control Theory and Applications | International | Vol.10, No.93 pp.299-303 2015 | D.Dinesh Kumar B.Meenakshipriya S.Sakthiya Ram |
| 402 | Enhancement of hybrid image watermarking algorithm using human visual system model based on discrete wavelet transformq | International Journal of Control Theory and Applications | International | Vol.10, No.93 pp.304-306 2015 | V.Sundhararaj B.Meenakshipriya |
| 403 | Investigation of Work-related Musculoskeletal Disorders among Male kitchen workers in South India | International Journal of Occupational Safety and Ergonomics | International | Vol.21, No.4 pp.524-531, 2015 | S.Shankar M.Shanmugam |
| 404 | Designing of Controllers for pH Neutralization Process | International Journal for Research in Applied Science & Engineering Technology | International | Vol.3, No.12 pp.164-169 December 2015 | S.Sakthiya Ram D.Dinesh Kumar B.Meenakshipriya |
| 405 | Experimental Investigations on Fractional order PI? controller in pH Neutralization System | International Journal of Control Theory and Applications | International | Vol.8, No.3 pp.865-875 December 2015 | B.Meenakshipriya M.Prakash C.Maheswari |
| 406 | Mathematical modeling of packed column for NOx gas removal using hydrogen peroxide solution | International Journal of Control Theory and Applications | International | Vol.8, No.3 pp.915-921 December 2015 | C.Maheswari R.Vinoth L.Kanimozhi B.Meenakshipriya |
| 407 | Dry Sliding Wear and Friction Behavior of Aluminum-Rice Husk Ash Composite using Taguchi’s Technique | Journal of Composite Materials | International | Vol.49, No.8 pp.2241-2250 2015 | S.D.Saravanan M.Senthilkumar S.Shankar |
| 408 | Frictional study of alumina, 316 stainless steel, phosphor bronze Vs carbon as mechanical seals under dry sliding conformal contact | Proc. IMechE., Part J: Journal of Engineering Tribology | International | Vol.229, No.11 pp.1292-1299 2015 | S.Shankar G.Praveenkumar P.Krishna Kumar |
| 409 | Wear in ceramic on ceramic type lumbar total disc replacement: effect of radial clearance | Bio-Medical Materials and Engineering | International | Vol.26, No.1-2 pp.89-96 2015 | S.Shankar D.Kesavan |
| 410 | Experimental investigations on pilot plant SO2 emission control system | Journal of Scientific and Industrial Research | National | Vol.74, pp.522-525 2015 | C.Maheswari K.Krishnamurthy R.Parameshwaran B.Meenakshipriya |
| 411 | pH Control of industrial effluent using CDM based PI controllers | Indian Journal of Chemical Technology | National | Vol.22, No.3-4 pp.141-147 2015 | B.Meenakshipriya K.Saravanan K.Krishnamurthy P.Kanthabhabha |
| 412 | Wiener model-based CDM-PI controller for pH neutralisation process | Modelling, Identification and Control, Inderscience | International | Vol.24, No.2 pp.127-137 2015 | B.Meenakshipriya S.Manikandan |
| 413 | Simulation and Analysis of Control System for a Solar Desalination System | International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering | International | Vol.9, No.9 pp.1552-1558 2015 | R.Prakash B.Meenakshipriya R.Kumaravelan |
| 414 | ‘Investigation Into Gas-Sensing Mechanism of Nanostructured Magnesium Aluminate as a Function of Temperature | Journal of Nanoscience and Nanotechnology | International | Vol.15, No.7 pp.5112-5122 2015 | N.Nithyavathy S.Arunmetha N.R.Dhineshbabu V.Rajendran |
| 415 | Optimization of process parameter for surface roughness in milling process using response surface methodology | IOSRD International Journal of Engineering | International | Vol.2, No.2 pp.11-16 2015 | T.Mohanraj B.Saravanan J.Mohamed Al Ameen |
| 416 | Hardness Measurement using Image Analysis in Matlab | Hardness Measurement using Image Analysis in Matlab | International | Vol.5, No.4 pp.288-297 2015 | K.Suganeswaran N.Nithyavathy R.Parameshwaran G.Raja M.Arun Prakash |
| 417 | Prediction of cutting force in turning process: an experimental and fuzzy approach | Journal of Intelligent and Fuzzy Systems | International | Vol.28, No.4 pp.1785-1793 2015 | S.Shankar S.K.Thangarasu T.Mohanraj D.S.Pravien |
| 418 | Experimental and CFD investigations of carbon/SS316 mechanical face seals under different lubricating conditions | Industrial Lubrication & Tribology | International | Vol.67, No.2 pp.124-132 2015 | S.Kavinprasad S.Shankar M.Karthic |
| 419 | Synthesis and characterisation of pure and dye sensitised TiO2 for Solar Cell applications | International Journal of Applied Engineering Research | International | Vol. 10 No.93 pp.323-327 July 2015 | Basil. M. Kuriakose N.Nithyavathy K.Suganeswaran C.Nuveen S.Arunmetha V.Rajendran |
| 420 | Design and Development of Roof Tile Production Mechanism Using Advanced Embedded Processor Control | International Journal of Innovative Research in Science, Engineering and Technology | International | Vol. 4, No.4 pp.pp.104-110 April 2015 | K.Krishnamurthy C.Maheshwari N.Nithyavathy P.Mohanasundaram P.Deepasundar G.Thisanth |
| 421 | Design and Fabrication of Automatic Garlic Peeler | International Journal of Innovative Research in Science, Engineering and Technology | International | Vol.4, No.4 pp.244-246 April 2015 | A.Shanmugam T.Mohanraj S.Prasanth |
| 422 | Experimental Investigations on the Stir Casting of 6063 Aluminium Alloy for Automobile Applications | Manufacturing Science and Technology | International | Vol 3, No.2 pp.38-41 2015 | A.Tony Thomas A.Muthukrishnan K.S.Sre Nandha Guhan |
| 423 | Optimization of PID controller parameters for SO2 Emission control process using PSO algorithm | Journal of Industrial Pollution Control | International | Vol.31, No.1 pp.41-45 2015 | C.Maheswari S.R.Arun V.Magalingam K.Jeevanrai K.Krishnamurthy |
| 424 | Analysis of Pile-up/Sink-in during spherical indentation for various strain hardening levels | Structural Engineering & Mechanics | International | Vol.53, No.3 pp.429-442, 2015 | S.Shankar P.Loganathan Johnney Mertens |
| 425 | An integrated framework for mechatronics based product development in a fuzzy environment | Applied Soft Computing | International | Vol.27, pp.376-390 2015 | R.Parameshwaran C.Baskar T.Karthik |
| 426 | An integrated fuzzy MCDM based approach for robot selection considering objective and subjective criteria | Applied Soft Computing | International | Vol.26,pp.31-41 2015 | R.Parameshwaran S.Praveen Kumar K.Saravanakumar |
| 427 | Analysis and modeling of different types of converter in switched reluctance motor for reducing the torque ripple | Innovations in Information, Embedded and Communication Systems | International | Vol.3, No.5 pp.1-6 2015 | V.Arunkumar K.Krishnamurthy B.Meenakshipriya |
| 428 | Theoretical Prediction on the Mechanical Behavior of Natural Fiber Reinforced Vinyl Ester Composites | Applied Science and Advanced Materials | International | Vol.1, No.3 pp.85-92 January 2015 | S.Ramakrishnan K.Krishnamurthy R.Sarathkumar R.Rajasekar |
| 429 | Investigation of chemically treated randomly oriented sansevieria ehrenbergii fiber reinforced isophthallic polyester composites | Journal of Composite Materials | International | Vol.48, No.24 pp.2961-2975, 2014 | T.P.Sathishkumar P.Navaneethakrishnan S.Shankar R.Rajasekar |
| 430 | Predicting the Wear of Ceramic-Ceramic Hip Prosthesis using Finite Element Method for different Radial Clearances | Tribology-Materials, Surfaces & Interfaces | International | Vol.8, No.4 pp.194-200, 2014 | S.Shankar |
| 431 | Modeling and design of MPPT controller using stepped P&O algorithm in solar photovoltaic system | International Journal of Electrical, Electronic Science and Engineering | International | Vol.8, No.3 pp.110-116, 2014 | R.Prakash B.Meenakshipriya R.Kumaravelan |
| 432 | Design optimization of Floor Cranes | International Journal of Science and Engineering Applications | International | Vol.3, No.5 pp.127-129, 2014 | A.Balaji H.Jahir Hussain M.R.Faheem Ashkar |
| 433 | Effect of radial clearance on wear and contact pressure of hard-on-hard hip prosthesis using finite element concepts | Tribology Transactions | International | Vol.57, No.5 pp.814-820, 2014 | S.Shankar R.NithyaPrakash |
| 434 | Wear prediction on silicon nitride bearing couple in human hip prosthesis using finite element concepts | Proc. IMechE., Part J: Journal of Engineering Tribology | International | Vol.228, No.7 pp.717-724, 2014 | S.Shankar R.NithyaPrakash |
| 435 | Dynamic contact analysis of total hip prosthesis during normal active walking cycle | International Journal of Biomedical Engineering and Technology | International | Vol.15, No.2 pp.114-127, 2014 | S.Shankar M.Manikandan M.Kalayarasan |
| 436 | Hand arm vibration measurement using micro-accelerometer in different brick structures | Smart Structures and Systems | International | Vol.13, No.6 pp.959-974, 2014 | K.Gomathi A.Senthilkumar S.Shankar S.Thangavel R.Mohana priya |
| 437 | Mobile Robot Path Planning Using Ant Colony Optimization | International Journal of Research in Engineering and Technology | International | Vol.3, No.11 pp.1-6 June 2014 | T.Mohanraj S.Arunkumar M.Raghunath M.Anand |
| 438 | Comparative Analysis on Mould Filling of A413 Aluminium Alloy in Sand and Evaporative Pattern Casting Process using Virtual Instrumentation | International Journal of Research in Engineering & Technology | International | Vol.3, No.11 pp.7-10 June 2014 | A.Tony Thomas R.Parameshwaran A.Muthukrishnan C.Kirubha |
| 439 | Model order reduction of interval systems by Pole clustering technique using GA | Journal of Theoretical and Applied Information Technology | International | Vol.66, No.1 pp.48-57, 2014 | V.G.Pratheep K.Venkatachalam K.Ramesh |
| 440 | Enlightenment Through Light-A Heuristic Approach To Data Transmission | International Journal of Innovative Research in Science, Engineering and Technology | International | Vol.3, No.2 pp.508-512 April 2014 | Kavin Balaji Venkatesh Vetriyvel N.Nithyavathy S.Arunkumar |
| 441 | Design and Fabrication of Semi-Automatic Bot for Drying Applications | International Journal of Innovative Research in Science, Engineering & Technology | International | Vol.3, No.2 pp.232-236 April 2014 | E.Praveen Kumar R.Karthikeyan N.Nithiyananda A.Tony Thomas S.Praveen Kumar |
| 442 | Hybrid ILC Strategy for Magnetic Ball Suspension System | Research Journal of Applied Sciences, Engineering and Technology | International | Vol.7, No.20 pp.4355-4358 May 2014 | S.Sathiyavathi K.Krishnamurthy PK.Bhaba S.Somasundaram |
| 443 | Design and fabrication of Automated Hacksaw Machine | International Journal of Innovative Research in Science, Engineering and Technology | International | Vol.3, No.2 pp.261-269 April 2014 | D.V.Sabarianand V.Siddharth B.Sushil Krishnan T.Mohanraj |
| 444 | Application of CDM-PI-P Controller for SO2 Emission Control Process | Control Engineering and Applied Informatics | International | Vol.16, No.1 pp.40-49, 2014 | C.Maheswari K.Krishnamurthy B.Meenakshipriya P.K.Bhaba |
| 445 | Semi Automatic Clutch in Heavy Vehicles | International Journal of Innovative Research in Science, Engineering and Technology | International | Vol.3, No.4 pp.19-23 April 2014 | R.Kirubashankar N.Prasanth M.Arun R.Balagurubaran D.Sabarish |
| 446 | Dynamic contact analysis of total hip prosthesis during Stumbling cycle | Journal of Mechanics in Medicine and Biology | International | Vol.14, No.3 pp.1-13, 2014 | S.Shankar M.Manikadan |
| 447 | Control of 5×2 Stacked Multicell Converter for Solar Panel | International Review of Automatic Control | International | Vol.7, No.2 pp.176-183 March 2014 | P.Ponnambalam M.Praveenkumar C.Dhanamjayulu K.Krishnamurthy |
| 448 | MPC for reduced voltage source multicell converter | Journal of Electrical Engineering | International | Vol.9, No.3 pp.493-499 2014 | P.Ponnambalam M.Praveenkumar K.Krishnamurthy |
| 449 | Modelling and Experimental analysis of packed column for SO2 emission control process | Journal of Atmospheric Pollution Research | International | Vol.5 pp.464-470 2014 | C.Maheswari K.Krishnamurthy R.Parameshwaran |
| 450 | Simulation of muscle activation patterns in the hip joint during normal level walking followed by sit-to-stand movement between two hip implants | Trends in Biomaterials and Artificial Organs | International | Vol.28, No.1 pp.19-25, 2014 | S.N.Omkar V.Boobalan D.V.Ramesh S.Shankar |
| 451 | Effect of Mechanical behaviours of Graphene oxide reinforced compatibilized High density Polyethylene | International Journal of ChemTech Research | International | Vol.6, No.3 pp 1894-1897, 2014 | K.V.Mahesh Kumar K.Krishnamurthy T.P.Sathish Kumar R. Rajasekar A. Siva Kumar |
| 452 | Research updates on grapheme oxide-based polymeric Nanocomposites | Polymer Composite | International | Vol.35, No.12 pp.2297–2310 2014 | K.V.Maheshkumar K.Krishnamurthy P.Sathishkumar S.Sahoo E.Uddin S.K.Pal R.Rajasekar |
| 453 | Investigation on the effects of conventional fossil fuel to the environment and research on renewable fuels with reduced emission using biodiesel, diethyl ether and hydrogen | Nature Environment and Pollution Technology | International | Vol.12, No.4 pp.661-666 Jan 2014 | C.Jegadheesan P.Somasundaram B.Meenakshipriya U.P.Vignesh |
| 454 | Effect of Strain Hardening during Unloading for an Elastic-Plastic Hemisphere in Contact with a Rigid flat | Mechanics of Advanced Materials and Structures | International | Vol.21, No.2 pp.139-144, 2014 | S.Shankar K.A.Arjun |
| 455 | Effect of DEE injection in pongamia pinnata biodiesel fulled CI engine using hydrogen as secondary fuel | Advanced Materials Research | International | Vol.768, pp.188-194 Dec 2013 | C.Jegadheesan P.Somasundaram B.Meenakshipriya U.P.Vignesh |
| 456 | Elimination of knocking effect in biodiesel operated CI engine with hydrogen as a secondary fuel | Energy Education Science and Technology Part A: Energy Science and Research | International | Vol. 31, No.3 pp.1677-1682 Dec 2013 | C.Jegadheesan P.Somasundaram B.Meenakshipriya |
| 457 | Low cost mobile Robot using Neural Network in Obstacle detection | International Journal of Scientific & Engineering Research | International | Vo.4, No.5 pp.26-29 2013 | N.Nithyavathy R.Nagarani R.Parameshwaran |
| 458 | Investigation of chemically treated longitudinal oriented snake grass fiber reinforced isophthallic polyester composites | Journal of Reinforced Plastics and Composites | International | Vol.32, No.22 pp.1698-1714, 2013 | T.P.Sathishkumar P.Navaneethakrishnan S.Shankar R.Rajasekar |
| 459 | Experimental investigations on SO2 removal process using wet scrubber | Journal on Pollution Research | International | Vol.32, No.3 pp.655-662, 2013 | C.Maheswari
K.Krishnamurthy R.Parameshwaran |
| 460 | Material selection of ace tabular component in human hip prosthesis using finite element concepts | International Journal of Experimental and Computational Biomechanics | International | Vol.2, No.2 118-135, 2013 | S.Shankar M.Kalayarasan L.Prakash |
| 461 | Effect of Particle Size on Tribological Behavior of Rice Husk Ash Reinforced Aluminum alloy (AlSi10Mg) Matrix Composites | Tribology Transactions | International | Vol.56, No.6 1156-1167, 2013 | S.D.Saravanan M.Senthilkumar S.Shankar |
| 462 | Characterization of new cellulose sansevieria ehrenbergii fibers for polymer composites | Composite Interfaces | International | Vol.20, No.8 575-593, 2013 | T.P.Sathishkumar, P.Navaneethakrishnan S.Shankar R. Rajasekar |
| 463 | Investigation on various proximal femoral stem shapes for human hip prosthesis using finite element concepts | Trends in Biomaterials and Artificial Organs | International | Vol.27, No.4 153-161, 2013 | S.Shankar, V.Boobalan, |
| 464 | Characterization of natural fiber and composites - A review | Journal of Reinforced Plastics and Composites | International | Vol. 32, No.19 pp.1457-1476 2013 | T.P.Sathishkumar P.Navaneethakrishnan S.Shankar R.Rajasekar N.Rajini |
| 465 | Experimental and CFD Investigations of Mechanical Seals under Dry / Compressed Air /Liquid Lubricating Conditions | Procedia Engineering | International | Vol.64, pp.419-425 2013 | M.Karthic S.Kavinprasad S.Shankar |
| 466 | Experimental Investigation of Friction Drilling on Brass, Aluminium and Stainless Steel | Procedia Engineering | International | Vol.64, pp.1219-1226 2013 | M.Boopathi S.Shankar S.Manikandakumar R.Ramesh |
| 467 | Hybrid iterative learning control design: Application to inverted pendulum | International Journal of Simulation Systems, Science & Technology | International | Vol.14, No.4 pp.46-50 August 2013 | S.Sathiyavathy K.Krishnamurthy P.K.Bhaba S.Somasundaram |
| 468 | PID control of ball and beam system a real time experimentation | Journal of scientific &industrial research | International | Vol.72, No.8 pp.481-484 Aug 2013 | S.Sathiyavathi K.Krishnamurthy |
| 469 | Finite element analyzing of different contact bearing couples for human hip prosthesis | International journal of biomedical engineering and technology | International | Vol.11, No.1 pp.66-80, 2013 | S.Shankar L.Prakash M.Kalayarasan |
| 470 | Mechanical properties of Snake Grass fiber with Banana and Coir fiber reinforced hybrid composites | Journal of Composite Materials | International | Vol.47, No.18 pp.2181-2191, 2013 | S.Shankar T.P.Sathishkumar P.Navaneethakrishnan J.Kumar |
| 471 | A Real-time Web-Enabled Platform for Information Monitoring and Fault Diagnosis in a Distributed Control System | Instrumentation Science and Technology | International | Vol.41, No.3 pp.236-250, 2013 | R.Kirubashankar K.Krishnamurthy |
| 472 | Investigation on Thermal Balance of CI Engine fuelled by Pongamia Pinnata Biodiesel and Hydrogen as secondary fuel | Mechanical Engineering, Special Issue on Heat Transfer | International | Vol.7, No.2 pp.375-378, 2013 | C.Jegadheesan P.Somasundaram |
| 473 | Muscle fatigue due to book arrangements in library shelf | Mechanical Engineering & Research | International | Vol.3, No.4 pp.262-265, 2013 | S.Shankar A.Josinhippolitus |
| 474 | Flow characteristics of the diffuser/nozzle micropump- A state space approach | Flow Measurement and Instrumentation | International | Vol.28, pp.28-34 2012 | S.Chandika R.Asokan K.C.K.Vijayakumar |
| 475 | Design and implementation of non linear system using gain scheduled PI controller | Procedia Engineering Elsevier | International | Vol.38, pp.3105-3112 2012 | B.Meenakshipriya D.Dineshkumar |
| 476 | Tensile and flexural properties of snake grass natural fiber reinforced isaphthallic polyester composites | Composites science and Technology | International | Vol.72, 2012 | T.P.Sathishkumar P.Navaneethakrishnan S.Shankar |
| 477 | Design and implementation of CDM-PI control strategy in pH Neutralization system | Asian journal of scientific Research | International | Vol.5, No.4 pp.78-92 2012 | B.Meenakshipriya K.Saravanan K.Krishnamurthy P.K.Bhabha |
| 478 | CDM based PI control strategy in pH neutralization system | Instrumentation Science and Technology-Taylor & Francis | International | Vol. 39, No.3 pp.273-287, 2011 | B.Meenakshipriya K.Saravanan S.Somasundaram P.Kanthabhaba |
| 479 | Design and Analysis of piezodriven micropump for Automotive applications | JSIR (Journal of Scientific and Industrial Research) | National | Vol.17, pp.448-454, 2011 | S.Chandika R.Asokan |
| 480 | Simulation and Optimization of Diffuser/Nozzle Micropump | Sensors and Transducers | International | Vol.135, No.12 pp.146-154, 2011 | S.Chandika R.Asokan |
| 481 | Simulation and Analysis of Piezoelectric Actuator | Journal of Micro and Nano Systems | International | Vol.2, No.1 pp. 15-18, 2011 | S.Chandika R.Asokan V.Karthikeyan |
| 482 | Design and Implementation of Hybrid wind and solar energy-solution for power crisis | Journal of Micro and Nano Systems | International | Vol.3, No.1 pp- 1-5, 2011 | S.Chandika R.Parvatham |
| 483 | Design and Implementation of web based remote supervisory control and information system | Soft computing and Engineering | International | Vol.1, No.4 pp. 43-51, 2011 | R.Kirubashankar K.Krishnamurthy |
| 484 | Effect of temperature on an elastic-plastic hemispherical asperity in contact with a rigid flat | International Journal of Computational Materials Science and Surface Engineering | International | Vol.4, pp.292-310, 2011 | S.Shankar P.Loganathan |
| 485 | Design of pH neutralization pilot plant for ETP | Journal of process and Plant Engineering | National | Vol.27, No.3 pp. 52-55, 2010 | B.Meenakshipriya K.Saravanan KKrishnamurthy S.Sathiyavathi |
| 486 | Estimation of hydrodynamic characteristics of stirred bubble column for air water-alcohol system | Journal of The Technology World | International | Vol.5, No.1 pp.219-224, 2010 | B.Meenakshipriya D.Devakumar K.Saravanan T.Kannadasan |
| 487 | An integrated performance management model for Automobile Repair Shops | Int. J. Business Excellence | International | Vol.3, No.1 pp.77-104, 2010 | R.Parameshwaran P.S.S.Srinivasan M.Punniyamoorthy |
| 488 | Implementation of Energy Management Structure for Street Lighting Systems | Journal of Modern Applied Science | International | June Vol.3, No.6 pp.30-37 2009 | C.Maheswari R.Jeyanthi K.Krishnamurthy M.Sivakumar |
| 489 | Implementation of Energy Management Structure for Street Lights | Modern Applied Science | International | Vol.3, No.6 pp.30-37, 2009 | K.Krishnamurthy R.Jeyanthi C.Maheshwari |
| 490 | Design and Fabrication of Coir Pith Prequetting Machine | World Applied Sciences Journal | International | Vol.7, No.4 pp-552-558, 2009 | K.Krishnamurthy C.Maheswari R.Udayarani V.Gowtham |
| 491 | Neural based pH system in Effluent treatment process | Journal of Modern Applied Science | International | Vol.3, No.4 pp.166-176, 2009 | B.Meenakshipriya K.Saravanan S.Sathiyavathi |
| 492 | Estimation of hydrodynamic characteristic of sparged bubble column for electrolytes and alcohol | Journal of Process and Plant Engineering | National | Vol.26, No.4 pp.41- 45, 2009 | B.Meenakshipriya D.Devakumar K.Saravanan |
| 493 | Remote monitoring system for distributed control of industrial plant process | Journal of Science and Industrial Research | National | Vol.68 pp. 858-860, 2009 | R.Kirubashankar K.Krishnamurthy J.Indra |
| 494 | Experimental and Theoretical Investigations on a Sphere in Contact with the Flat Plate | RSM International Journal of Engineering, Technology and Management | International | Vol.1, pp.18-33, 2009 | S.Shankar M.M.Mayuram |
| 495 | Integrating Fuzzy AHP and DEA for Performance Management in Automobile Repair Shops | European Journal of Industrial Engineering | International | Vol.3, No.4 pp.450-467, 2009 | R.Parameshwaran P.S.S. Srinivasan M.Punniyamoorthy |
| 496 | Modified closed loop model for Service Performance Management | International Journal of Quality and Reliability | International | Vol.26, No.8 pp.795-816, 2009 | R.Parameshwaran P.S.S.Srinivasan M.Punniyamoorthy |
| 497 | Application of RSM and ANN to predict the tensile strength of friction stir welded A319 cast aluminium alloy | Manufacturing Research | International | Vol.4,No.3 2009 | M.Jayaraman R.Sivasubramanian |
| 498 | Study of Common Effluent Treatment Plant | Journal of Process and Plant Engineering | National | Vol.26, No.2 pp.33-41, 2008 | B.Meenakshipriya K.Saravanan R.Shanmugam |
| 499 | Study of pH system in common effluent treatment plant | Journal of Modern Applied Science | International | Vol.2, No.4 pp. 113-121, 2008 | B.Meenakshipriya K.Saravanan R.Shanmugam S.Sathiyavathi |
| 500 | Effect of strain hardening in elastic-plastic transition behavior in a hemisphere in contact with a rigid flat | International Journal of Solids and Structures | International | Vol.45, No.10 pp.3009-3020 May 2008 | S.Shankar M.M.Mayuram |
| 501 | A Finite Element Based Study on the Elastic-Plastic Transition Behavior in a Hemisphere in Contact With a Rigid Flat | ASME Journal of Tribology | International | Vol.130, No.4 pp.044502_1 -044502_6 October 2008 | S.Shankar M.M.Mayuram |
| 502 | Sliding interaction and wear studies between two hemispherical asperities based on finite element approach | International Journal of Surface Science and Engineering | International | Vol.2, pp.71-83, 2008 | S.Shankar M.M.Mayuram |
| 503 | An integrated closed-loop model for service performance management | International Journal of Services and Operations Management | International | Vol.4, No.1 pp.34-55, 2008 | R. Parameshwaran P.S.S.Srinivasan |
| 504 | Energy Savings In Compressed Air Supply System Using Dynamic Controller | Energy Heat and Mass Transfer | International | Vol.30, No.1, 2008 | S. Nithiyanandam P.S.S.Srinivasan |
| 505 | Experimental investigations on solidification of LM25 Aluminium Alloy in Lost Foam Casting and Sand casting Using Virtual Instrumentation | Indian Foundry Journal | National | Vol. 54,No.4, pp.21-25 2008 | M.Jayaraman R.Sivasubramanian |
| 506 | Application of Probablistic Neural Network for the Development of Wear Mechanism Map for Glass Fiber Reinforced Plastics | Journal of Reinforced Plastics and Composites | International | Vol.26, No.18 pp. 1893-1906, 2007 | V.Srinivasan K.V.Maheshkumar R.Karthikeyan K.Palanikumar |
| 507 | Energy Efficient Eco-friendly (E3) roof-A Transient thermal analysis | Energy, heat and mass transfer Centre for Energy, heat and mass transfer,IIT-Chennai | International | Vol.29,pp.27-41 2007 | KCK.Vijayakumar S.Dhandapani |
| 508 | Studies on the factors Influencing the Quality of Aluminium Alloys in the lost foam casting process | Indian Foundry Journal | National | Vol.52,pp.29-34, 2006 | M.Jayaraman R.Sivasubramanian |
| 509 | Energy Conservation in Air Compressors by Suitable Pressure Bandwidth Modulation | ICFAI National Journal of Science and Technology, | National | Vol.2, No.2 September 2006 | S.Nithiyanandam P.S.S.Srinivasan |
| 510 | Effect of Chill Position and Size During Solidification of Aluminium Casting | Indian Foundry Journal | National | Vol.51, No.9 pp.26-31, 2005 | K.Krishnamurthy V.P. Arunachalam |
| 511 | Influence of Fillet Radius and aspect ratio in solidification of aluminum casting | Indian Foundry Journal | National | Vol.50, No.12 pp. 27-33, 2004 | K.Krishnamurthy V.P.Arunachalam |